Hot Rods Adjustable Drag Link

I'm looking for a source that has custom drag link / tie-rod tubes in lengths under 20". I specifically need them tapped 11/16-18. I have found Speedway and others have them but only in longer lengths. Worse comes to worse, I'll by a left-hand tap (I already have the RH tap) and will make my own.

Thanks guys.

 

Buy 1, cut off the rh side to length, take your rh tap and re-tap threads...

 

Buy the tap and a couple of lengths of DOM and be done with it. And have a better product than most.

 

I just ordered the rod ends and tubing as I thought I would end up having to do. I was ust checking for other sources before committing.

 

I thought Speedway would make custom lengths???

 

There is a guy about 30 miles north of you that can help. He has a LH tap, and a massive lathe. Send me a PM.

 

I have one in stainless that measures 17 1/2" long. Send me a PM if it will work for you.

 

I've has Pete & Jake's make me custom lengths several times.

 

Thanks Marty. I had already ordered when I saw your thread but appreciate your offer. I'll not react so quickly next time!

 

Dang GM. That would have been nice. Thanks much for chiming in.

 

I had a massive lathe once!

I've never done that.........right!