Register now to get rid of these ads!

Projects A new '32 project of my own.

Discussion in 'The Hokey Ass Message Board' started by hot rod pro, May 3, 2015.

  1. Andy K
    Joined: Jan 12, 2020
    Posts: 25

    Andy K
    ALLIANCE MEMBER

    Man that’s such a great color. I considered doing my 27 roadster’s repaint in a color pretty close to it, Grigio Telesto which is from Lamborghini but decided on going with a garnet


    Sent from my iPhone using The H.A.M.B. mobile app
     
    loudbang likes this.
  2. Too cool. Sounds fantastic!

    Nice to have something new added to the Bruce’s Rod Shop stable.
     
    loudbang likes this.
  3. 340HilbornDuster
    Joined: Nov 14, 2011
    Posts: 1,851

    340HilbornDuster
    ALLIANCE MEMBER

    Flawless work on the car!...Nice Stance!!...You must be a Master Plumber...Above and Beyond!!!...Wowsers!
    upload_2020-1-16_16-6-26.png
    What kind connectors are those?...
     
    32SEDAN, 26hotrod, alfin32 and 2 others like this.
  4. loudbang
    Joined: Jul 23, 2013
    Posts: 25,259

    loudbang
    Member

    Good work paying off. :)
     
    brady1929 and kidcampbell71 like this.
  5. rod1
    Joined: Jan 18, 2009
    Posts: 646

    rod1
    ALLIANCE MEMBER

    Sounds so Good,I was looking at the rolling chassis,thinking I'd have a hard time covering up all that beauty.Then I saw the Video.All I could think of was Burnouts!Once again ,Great Job!
     
    loudbang likes this.
  6. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    It is ones I make.


    Sent from my iPhone using H.A.M.B.
     
    loudbang and kidcampbell71 like this.
  7. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Made some progress on the headlights, grill and hood.


    Sent from my iPhone using H.A.M.B.
     
    32SEDAN, Tjompen, 26hotrod and 10 others like this.
  8. DDDenny
    Joined: Feb 6, 2015
    Posts: 12,904

    DDDenny
    Member
    from oregon

    Getting closer, some nice machine work Danny, are you doing the wire bezels on a CNC?
    The ends would look good black anodized also, I like the black braided wire covers too.
     
    26hotrod likes this.
  9. pprather
    Joined: Jan 10, 2007
    Posts: 1,552

    pprather
    Member

    Tell me about the single finger hood latches. Thanks.

    Phil
     
    loudbang likes this.
  10. alchemy
    Joined: Sep 27, 2002
    Posts: 14,736

    alchemy
    ALLIANCE MEMBER

    Single finger hood latches were an early 32 production item. Most original Ford ones had a flat side facing the hood. There are now repros available, but they don't have a flat side.
     
    26hotrod and loudbang like this.
  11. Tim
    Joined: Mar 2, 2001
    Posts: 10,443

    Tim
    Member
    from Raytown Mo

    Looks fantastic
     
    26hotrod and loudbang like this.
  12. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    Yes, I do them on my CNC lathe.


    Sent from my iPhone using H.A.M.B.
     
    26hotrod and loudbang like this.
  13. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    There were flat and round sided single pulls. The repos are round and have a non ‘32 base on them.


    Sent from my iPhone using H.A.M.B.
     
    26hotrod and loudbang like this.
  14. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    UPDATE:
    Rear window is in. Interior support structure is in. Roll bar/seat belt mount is in. Checking things off the list. #brucesrodshop
     

    Attached Files:

  15. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    UPDATE:
    Doors on and latching. The light at the end of the tunnel is so beautiful! #brucesrodshop
     

    Attached Files:

  16. loudbang
    Joined: Jul 23, 2013
    Posts: 25,259

    loudbang
    Member

    Now THAT is a HOT ROD. Fantastic job well done.
     
    26hotrod, kidcampbell71 and brady1929 like this.
  17. deucendude
    Joined: Oct 31, 2008
    Posts: 528

    deucendude
    Member
    from norcal

    This is a treat to see now. I have been looking occasionally. Hope to see it on the west coast this year.
     
    brady1929 and loudbang like this.
  18. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    UPDATE:
    A few small details, and interior, and you can call this thing DONE!
    I would like to personally thank my family and friends who have made this car even possible. Thank you to all who have made positive and negative comments during the build. I take every one as inspiration to do better. #brucesrodshop #the32mafia
     

    Attached Files:

  19. DDDenny
    Joined: Feb 6, 2015
    Posts: 12,904

    DDDenny
    Member
    from oregon

    From all angles this car is perfect!
    Danny, after some time on the road could you post your thoughts on the Coker Firestones.
     
    26hotrod and Just Gary like this.
  20. hot rod pro
    Joined: Jun 1, 2005
    Posts: 2,684

    hot rod pro
    Member
    from spring tx.

    Based on dad’s roadster. They work great after a few warm up miles. Only drawback is the tire life. Could be better.
     
    26hotrod, Just Gary and loudbang like this.
  21. DDDenny
    Joined: Feb 6, 2015
    Posts: 12,904

    DDDenny
    Member
    from oregon

    Thanks
     
  22. 54reno
    Joined: Dec 4, 2009
    Posts: 113

    54reno
    Member

    Awesome Hot Rod!!!
     
    26hotrod and loudbang like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.