Register now to get rid of these ads!

Projects 61 Ford unibody build

Discussion in 'The Hokey Ass Message Board' started by JakeDW, Nov 10, 2012.

  1. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Arms welded up .

    Jake
     

    Attached Files:

  2. Redheadedlefty13
    Joined: Jan 14, 2012
    Posts: 87

    Redheadedlefty13
    Member
    from Avon, Ohio

  3. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Thanks man it's been a slow go but looks like I get to move to the rear for a bit.

    Jake
     
  4. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Got the Cups made and had to stick it together to check it out.
     

    Attached Files:

  5. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Still need to blow it back apart and get the grinding done but that will be for a nother day.


    Jake
     

    Attached Files:

    Last edited: Jan 6, 2013
  6. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Got the rear free from the leafs.
     

    Attached Files:

  7. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Gona have to cut out betwine the wheel wells and up about 3 feet to get the rear done and I will either raise or put back what I can.
     

    Attached Files:

  8. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Pic of the side of the uni.
     

    Attached Files:

  9. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Cut the bed out started the notch.

    Jake
     

    Attached Files:

  10. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Boxed about foot half of the frame put on the other side of the notch.and top tacked on.

    Jake
     

    Attached Files:

  11. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Got the frame cut out bottom of notch welded on.

    Jake
     

    Attached Files:

  12. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Started getting the rear in place.

    Jake
     

    Attached Files:

  13. flatout65
    Joined: Dec 1, 2007
    Posts: 98

    flatout65
    Member
    from mid tenn

  14. Lowrders
    Joined: Sep 10, 2009
    Posts: 303

    Lowrders
    Member
    from DUBUQUE IA

    Subscribed! Love those trucks!
     
  15. Derek Mitchell
    Joined: Nov 22, 2004
    Posts: 1,796

    Derek Mitchell
    Member

    Nice. Keep it up.
     
  16. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Thanks you need to do a build thread on yours.

    Jake
     
  17. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Thanks your 52 Chevy build is sweet and I have read it several times.

    Jake
     
  18. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Thank you I hope to make more progress this Friday and Saturday .

    Jake
     
  19. mattrod68
    Joined: Jan 22, 2007
    Posts: 524

    mattrod68
    Member

    dig it man, like the chrome reverse, classic sixties wheel choice.

    keep at it
     
  20. TULSA
    Joined: Sep 27, 2008
    Posts: 659

    TULSA
    Member
    from Tulsa

    Looking good. Keep.it up.

    Sent from my DROID device using the TJJ mobile app
     
  21. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Thank you wheels are a hard thing to decide on.But they are just 15x7 standard offset.

    Jake
     
  22. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Thank you I need to get out there and do some more planing 4 link and crossmember time.

    Jake
     
  23. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Cross and top link bars

    Jake
     

    Attached Files:

    Last edited: Sep 29, 2013
  24. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    ///////////////
    Jake
     
    Last edited: Sep 29, 2013
  25. derbydad276
    Joined: May 29, 2011
    Posts: 1,324

    derbydad276
    Member

    are any of the 4 link ends adjustable?
     
  26. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Yea both top and bottom have adj links if you look close the top bars on the axle are the adj ends.

    Jake
     
    Last edited: Sep 29, 2013
  27. matthew mcglothin
    Joined: Mar 3, 2007
    Posts: 970

    matthew mcglothin
    Member

    I agree also.!Fits the truck...perfect!
     
  28. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Your 58 is bad ass.

    Jake
     
  29. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Got it on the ground this afternoon.

    Jake
     
    Last edited: Sep 29, 2013
  30. JakeDW
    Joined: Sep 30, 2012
    Posts: 580

    JakeDW
    Member
    from Missouri

    Side shot.

    Jake
     

    Attached Files:

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.