57 inline 6 235..Popping,Sputtering

Soooooooooo???...

 

Are they on correct now....100% sure?

 

Do ya hear anything??

 

Fired Up..Like a Beast... Sounds realy good...But the valves are a Little Clicky...Gonna have to se those tomorrow...Thanks for the Help all....I'm Gonna Test Drive...

 

It is, actually.

My shop is on the island that the ferry from westport lands on!

 

Nice! Way to go guys

 

clicky valves are not bad, Congratulations... Check back in tomorrow.

 

I can't believe I have been following this, but it sure is nice to see help being given to a new guy. Congrats sloppy...

 

Hydro valves in a 235 are like bar girls...if you find a tight one loosen her up a bit.

 

OK, I know where your at now, I lived in Hillsboro for almost 40 years.

 

Yay!!!!!!!!! Hey...be careful, Sloppy!...lol.

Better to have "ticky" valves than too tight. We can address that tomorrow...and a couple other things too. I suspect you may have a vacuum leak at the carb, (maybe) and somebody adjusted the fuel mixture to compensate.

'Night guys. But I'll be here for a few more minutes just to see what Sloppy says.

 

:d:d:d

 

Congrats, Sloppy!

nothing like a little entertainment during a tune-up, eh!?!

 

Just waiting for sloppy to get back from his test drive...

Nite fellas

 

It sure is beautiful out here!

 

CVD...I've been half paying attention to what you guys are talking about. Do you really live on an island in the middle of the Columbia river?

 

Yes, there are a couple islands on the river that have housing and NO....its HELL here STAY away, zombies and unemployment, rain, etc. Run far away.

 

Damn...it's almost 2:00am here. Sloppy must be havin' a good time, or he got pulled over, god forbid an accident...or we fucked up his car and he broke down...lol.

 

Or it purrs like the kitten he picked up at 7-11 and he's trying like mad to run outta gas

 

My shop is on an island in the middle of the river.

I used to have a house on the island as well.

Now we are building a new house on the bank of another river about 10 minutes away!

I cant have a dock at the new house, but we have one at the shop.

 

Hahahahaha! Stay away! It's hell! I get it.

 

I have a small vacuum line on the driver side of the Carb..when I crank the motor..I hear it suck like crazy... and wont start...So I put a rubber..Vacuum plug on it..and I assume that's where the problem is..I cant find a pic anywhere with that carb..on the internet..I have no idea where it should go...I figure its not a 57.. he prob used a different yr. Carb...I took it apart and cleaned it..It had new Gaskets....

 

Does it have a line going to the vacuum port on the advance pot of the dizzy?

 

Yup...vacuum leak. When did you unhook the hose and plug the port?

Before we started here tonight? Or just now?

 

Is the port you plugged at the carb a secondary port?

 

Should we start a pot of coffee?

 

Nah...twist one up.

 

I quit twisting when I became allergic to handcuffs

 

What's up, Sloppy?

 

Looking at the pic posted earlier, I see where the vacuum line should be, and I dont see one running from the dizzy.

The pic of the dizzy is pretty dark on my screen, though.