Register now to get rid of these ads!

Event Coverage 49th Annual Fitchburg Swap Meet and Car Show - 2019

Discussion in 'The Hokey Ass Message Board' started by patmanta, Feb 1, 2019.

  1. Parts or Wives? :eek:
     
    Robert J. Palmer and patmanta like this.
  2. patmanta
    Joined: May 10, 2011
    Posts: 3,383

    patmanta
    ALLIANCE MEMBER
    from Woburn, MA
    1. MASSACHUSETTS HAMB

    It's probably the biggest one in Massachusetts. It occupies quite a bit of the airfield between the vendors and the cars that show up for the show part on the other side of the field.

    Here's just one row down the strip:
    20180422_094357.jpg
     
  3. If you are looking for early For parts are vintage speed parts this is a can't miss. I travel 4 hours to sell at this one,

    You can never have to many parts or wives, but I can never find a women who likes cars, racing and is will in to share the greatness that is me! :D

    Which reminds me-
    upload_2019-3-18_13-42-28.png
     
    TFoch and patmanta like this.
  4. Like I said, things change on a dime. Met with surgeon yesterday. Now my surgery has been moved to April 25th for necessary reasons. Going to miss Fitchburg now as well. Glad I drove the Coupe the other day. Snowed again last night, so roads are full of crap again.:mad:
     
    Sporty45 and loudbang like this.
  5. Some of my parts os sale N.O.S. wheel bearing- upload_2019-4-10_16-58-23.png
     
    Last edited: Apr 10, 2019
    loudbang and tb33anda3rd like this.
  6. I will also be selling my Vintage Mor-Drop axle and spindles 37-41 Ford polished beam sandblasted and primered.

    Available with or without wishbones.
    upload_2019-4-10_18-50-54.png

    I am having a bear of a time getting photos to upload
    I also have-
    Machined wide five hubs/drums
    39-41 Ford backing plate with parking brake hardware, missing adjuster hardware.
     
    gonzo, loudbang and ABONES like this.
  7. Shutter Speed
    Joined: Feb 2, 2017
    Posts: 437

    Shutter Speed
    ALLIANCE MEMBER

    Anybody need a set of '30/31 glass Model A fenders (no aprons)?
    Will bring em only if somebody wants em.
     
    loudbang likes this.
  8. patmanta
    Joined: May 10, 2011
    Posts: 3,383

    patmanta
    ALLIANCE MEMBER
    from Woburn, MA
    1. MASSACHUSETTS HAMB

    I'm going to piggyback on @BOSTONCAMARO with a few things unless I unload them beforehand. I've got a 34 hood that needs a new home.
     
    loudbang likes this.
  9. Some more parts-
    Model A firewall with vintage wheelbarrow patch/engine setback kit

    upload_2019-4-11_17-40-32.png upload_2019-4-11_17-41-49.png upload_2019-4-11_17-42-40.png
    Model A dash rail-
    upload_2019-4-11_17-45-38.png
     
    loudbang and patmanta like this.
  10. Król
    Joined: Jun 8, 2014
    Posts: 213

    Król
    ALLIANCE MEMBER

    Ted how is swap meet for vintage Chevrolet parts? Is it worth the 2hr trip?
     
    loudbang and TFoch like this.
  11. wheeldog57
    Joined: Dec 6, 2013
    Posts: 1,513

    wheeldog57
    Member

    I have the front half of a 33 Chevy chassis, front end, steering, etc if yo are interested
    I can send pics later, PM me
     
    loudbang likes this.
  12. vetteson
    Joined: Oct 7, 2010
    Posts: 152

    vetteson
    Member

    So I guess I am a "Hippie Farmer", close but no cigar but I do crave the smell of "manur" in the spring...
    The fear of western MA among the eastern "elite" is the lasting belief that we are still fighting the French and Indian War. It's over....and Daniel Shays is dead. Go UMass hockey
     
    Last edited: Apr 12, 2019
  13. tb33anda3rd
    Joined: Oct 8, 2010
    Posts: 14,994

    tb33anda3rd
    ALLIANCE MEMBER
    1. Connecticut HAMB'ers

    I saw some stuff.....it wasn't all Ford crap.
     
  14. Two weeks away none of you New England guys need me to bring something you bought in New York over?
     
    loudbang likes this.
  15. 48fordnut
    Joined: Nov 4, 2005
    Posts: 3,599

    48fordnut
    ALLIANCE MEMBER

    Pics from the swap meet Please.

    thanks,

    jim
     
    Cliff Ramsdell and loudbang like this.
  16. Sporty45
    Joined: Jun 1, 2015
    Posts: 673

    Sporty45
    Member
    from NH Boonies

    If someone would bring rear fenders for my 47 Olds I'd be a happy man!
     
    loudbang and 41 coupe like this.
  17. Jmountainjr
    Joined: Dec 29, 2006
    Posts: 839

    Jmountainjr
    ALLIANCE MEMBER

    Not selling anything this year, but will be there to look around.
     
    loudbang likes this.
  18. hiboyroadsterboy
    Joined: Nov 16, 2003
    Posts: 1,827

    hiboyroadsterboy
    Member
    from Mass

    Wouldn't miss it.
     
    loudbang likes this.
  19. greaser
    Joined: Apr 30, 2006
    Posts: 812

    greaser
    ALLIANCE MEMBER

    This is the one NOT to miss. Early ford parts up the kazoo. Hope to see all HAMBERS there!
     
    patmanta and loudbang like this.
  20. patmanta
    Joined: May 10, 2011
    Posts: 3,383

    patmanta
    ALLIANCE MEMBER
    from Woburn, MA
    1. MASSACHUSETTS HAMB

    Weather2019a.jpg
    The weather report is looking OK so far!
     
    Shutter Speed likes this.
  21. Sounds Good!!!
     
    patmanta likes this.
  22. GregCT.
    Joined: Jun 16, 2008
    Posts: 552

    GregCT.
    Member
    from CT.

    Planning on going. Spots 260 and 261. Mostly 32 parts and hot rod goodies.
     
    patmanta likes this.
  23. Just over a week away!

    More parts-

    Front Wide 5 hubs sandblasted primered machined with bearings and nuts

    Front and rear backing plates I don't have the adjuster hardware. I do have the parking brake hardware.
    Parking brake tubes are rough but the plates are nice.

    [​IMG][​IMG] [​IMG][​IMG][​IMG]
     
    ABONES likes this.
  24. harpo1313
    Joined: Jan 4, 2008
    Posts: 1,619

    harpo1313
    Member
    from wareham,ma

    we got a load coming from the cape. Robert your pics didn't work.
     
    patmanta likes this.
  25. I am in the first row space 11, 95 Marina Blue Chevrolet Pick Up with a cap and trailer New York Plates.
    Stop by say hello I would like to put faces with names of the H.A.M.B.ers I don't already know.



    Front Wide 5 hubs sandblasted primered machined with bearings and nuts

    Front and rear backing plates I don't have the adjuster hardware. I do have the parking brake hardware.
    Parking brake tubes are rough but the plates are nice.
    upload_2019-4-20_12-50-1.png upload_2019-4-20_12-50-18.png upload_2019-4-20_12-50-46.png upload_2019-4-20_12-51-14.png upload_2019-4-20_12-51-51.png
     
    patmanta, ABONES and tb33anda3rd like this.
  26. patmanta
    Joined: May 10, 2011
    Posts: 3,383

    patmanta
    ALLIANCE MEMBER
    from Woburn, MA
    1. MASSACHUSETTS HAMB

    Weather seems to have shifted a little for the worse but we'll see when we get there. "Partly cloudy in the morning. Increasing clouds with periods of showers later in the day. High 59F. Winds WSW at 10 to 15 mph. Chance of rain 40%."

    ANYWAY , Let's do a ROLL CALL with your SPOT NUMBERS!

    So far I've got @Robert J. Palmer in #11 and @BOSTONCAMARO in #198/199

    WHERE ARE THE REST OF YOU AT THIS SUNDAY?
     
  27. [​IMG]
     
    patmanta likes this.
  28. speedo1
    Joined: Feb 28, 2008
    Posts: 57

    speedo1
    Member
    from U.S.A.

    This will be my first, any chance any Model T sheet metal/ bodies could show up? Thanks
     
    patmanta likes this.
  29. Early Ford sheet metal always shows at Fitchburg. Photos of about the last 5 years

    [​IMG]
    [​IMG][​IMG][​IMG][​IMG][​IMG]
    [​IMG][​IMG][​IMG][​IMG][​IMG]

    As do vintage speed parts[​IMG][​IMG]
    [​IMG][​IMG][​IMG][​IMG]

    [​IMG][​IMG][​IMG][​IMG]
     
    Stogy, patmanta and tb33anda3rd like this.
  30. Cliff Ramsdell
    Joined: Dec 27, 2004
    Posts: 992

    Cliff Ramsdell
    Member

    Weather not looking to promising. I don’t think I’ll drive the car but might make the trip still, we’ll watch the weather.

    Cliff Ramsdell
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.