Looking for some info on how much a spindle arm, needs to be adjusted (lowered) in order to fit under a stock "A" wishbone. Setting up a stock A (banger) with 40' ford backing plates and spindles, and a 4" inch drop axle. I know that the spindles need to be heated and bent down in order to clear the wishbone. My problem is I don't have a torch that'll get them hot enough and I would like my father to be able to bend them down for me before he sends them out. Any help would be greatly appreciated! Thanks for the time.
i'm going to end up doing this too, from what i hear about an inch down then out untill they almost touch the backing plates to correct the steering.
The Jalopy Journal
