Technical 4-lug wheels

Looking for some sort of custom wheel for 4on 4.5 lug pattern. 14 or 15 by 5 or 6. Searched around some. But only found newer looking ones. Looking for something to put on a '60's build '48 Anglia.

 

Slots come to mind


...........evidently you can still buy em new too in 15x7
http://www.americanracingwheelsinfo.com/American_Racing_Ansen_Sprint_Slot_Mag.htm

 

Wow, slots is kinda what I was looking for. Was looking at something a little thinner for the front. Thanks.

 

CRAGERS!!
But might be hard to find

 

I have the slots but in 13 inch.

 

Been finding 13" stuff. Really would like 14 or 15. And yes, Cragers would also be cool.

 

typo: Cragars might be less hard to find.

 

Same difference.

 

Pinto, Mustang 2, and most 80s Fords used this bolt pattern. Want skinnys on the front? Ford had aluminum-wheel 'space saver' spares in a lot of these in the 80s.

 

Early 6 cylinder Mustang also used this pattern. Anyone upgrading V8 style would be offloading the 4 stud rims cheap. Some cool ones out there but most not Hamb friendly.

 

Pinto, Mustang II have 4x4.25", Maverick, Mustang and Chevy II had 4x4.5" also 240Z and TVR

 

Ansen made narrow 15" 4 lug for VWs - the ones with a solid flange can be redrilled...

 

Nope.

After the Maverick the pattern went to 4-on-4-1/4".

 

Mitsubishi RWD [dodge colts, Sapporo's,etc] and Nissans [bluebirds early Z's] all were 4 x 4.5" [4 x 114.3 in real measurements]