Register now to get rid of these ads!

348/409 3x2 aluminum intake

Discussion in 'The Hokey Ass Message Board' started by Wally, Jul 26, 2009.

  1. Wally
    Joined: Jul 5, 2009
    Posts: 284

    Wally
    Member
    from Iowa

    Is there any company out there that is making a 3x2 aluminum intake for the 348 or 409?
     
  2. There's talk of a complete intake and carb setup being available soon from Barry Grant.

    Max
     
  3. FunnyCar65
    Joined: Mar 11, 2007
    Posts: 2,092

    FunnyCar65
    Member
    from Colorado

    Doesn't Offenhauser?
     
  4. Nope, no OEM or aftermarket aluminum 3x2 intakes made just the cast iron 348 intake. Sounds like Barry Grant will make them for both large and small port heads!!!:eek: Can't wait to see them!
     

  5. Wally
    Joined: Jul 5, 2009
    Posts: 284

    Wally
    Member
    from Iowa

    No idea on the date to be released?
     
  6. Wally
    Joined: Jul 5, 2009
    Posts: 284

    Wally
    Member
    from Iowa

    Where did you hear this from? Was it a good reliable source? (sounds too good to be true?)
     
  7. Edelbrock has heads and 3 X 2 intakes for both large and small port W-head motors!

    No shittin' just look at their site or Summit, etc.
     
  8. That info came directly from a HAMBer that works at Barry Grant. I pm'd him for more info and he said that the setup would be coming out in the near future. Can't wait to see pics!!!:cool:

    Max
     
  9. Do you have any pics or links to those intakes as I couldn't find anything on the Edelbrock or Summit websites regarding them just the 1x4 and 2x4 intakes.

    Max
     
  10. dickster27
    Joined: Feb 28, 2004
    Posts: 3,209

    dickster27
    Member
    from Texas

    Interesting, I'm with you Max, I would like to see this too. How about a link to prove your statement "dragdoc"?
     
  11. Guys I do all I can to get posts up and sometimes am successful with photos. Got a Summit catalog right here...July-August 2009...the two intakes are on page 35 upper right corner under "add multi-carb power with Edelbrock" part # EDL-5408 and EDL-5409. Heads are on page 158 part # EDL-60819. Notice the "natural" casting W- head picture at the top of the page.

    Come on...no one else has noticed these before? I guess we 348/409 owners are few and far between.
     
  12. Terry O
    Joined: Oct 12, 2004
    Posts: 1,060

    Terry O
    Member

    Hey Doc, Us 348/409 owners never noticed because their ain't no such animal!

    Your Summit references: 4x2's NOT 3x2
    Intake Manifold, Dual Quad, Small Port, Aluminum, Natural, Dual Square Bore, Chevy, 348, 409, Each
    Part Number: EDL-5408
    $415.95 $415.95 Remove
    Edelbrock 5409 - Edelbrock Performer RPM Dual-Quad Air-Gap Intake Manifolds


    Intake Manifold, Dual Quad, Large Oval Port, Aluminum, Natural, Dual Square Bore, Chevy, 348, 409, Each
    Part Number: EDL-5409

    Terry
     
  13. Wally
    Joined: Jul 5, 2009
    Posts: 284

    Wally
    Member
    from Iowa

    I emailed BarryGrant and his customer support people sent this reply back.

    We are building the prototypes right now but do not have any idea when they will be done and then on to casting.
    Thank you,


    Technical Support

    Barry Grant, Inc.
    BG Fuel systems, Demon Carburetion, Nitrous Works, Rush Performance Filters


    1450 McDonald Road
    Dahlonega, GA 30533


    Phone (706) 864-8544 Fax (706) 864-2206

    Mon to Fri 8am to 6pm EST

     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.