***SOLD***I’ve got what I’m pretty sure is a NOS flywheel that came off of a 392 Hemi I sold. It measures 14-3/4”, has a 172 tooth ring gear, and the clutch pattern measures 12-3/4” which I’m pretty sure is for an 11” clutch. This would fit any 354 or 392 Chrysler Hemi, and I’m pretty sure the ‘54 and ‘55 331, as well as the Poly motors. The flywheel has some minor surface rust which should clean up easily, and the ring gear looks brand new. Considering the least expensive flywheel you can get for one of these motors now is nearly $400, I think $250 plus any actual shipping charges should be fair. for the pair should be fair. It can also be picked up anywhere in the San Francisco Bay Area, California. I also have a Bellhousing for a Torqueflite Automatic trans for the same application, that may be easily adapted to run a manual transmission. The bell housing is casting number is 1630793, and appears to be NOS as well, though it is a bit dirty and has some paint overspray. I would include it with the sale of the flywheel for an additional $50, or buy itself for $100 plus shipping.
The Jalopy Journal
