Register now to get rid of these ads!

Projects '33 5W Jalopy: Rebuild for TROG

Discussion in 'Traditional Hot Rods' started by Shaun1162, Dec 27, 2016.

  1. Aaron D.
    Joined: Oct 27, 2015
    Posts: 305

    Aaron D.
    Member

    Those pistons look great. How did you clean them?
    Aaron
     
  2. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

    Yeah, just never really seen another set of Offy's with outlets like these (or any other brand). Kind unique, but not sure the generator offset will clear. Could just run an idler pulley instead though.

    Thanks man. Really happy with how the grill turned out.

    Thanks! Ill try and remember to hit him up, always love to learn more about this stuff.

    Hey no rush! Just neat to think that distributor was in a sedan, racing side by side with this coupe some 50 years again...

    Thanks for the kind words. I got hung up too long on try to preserve everything, when in reality I should have just focused on my own rendition of it. 20/20 hindsight I guess.

    Old jalopies are a good starting point, depending on the project. Thankfully this body was in incredible shape (aside from the bottom) so that definitely helped.

    Glad to hear this isn't a dead-end. Thankfully I've got the help of some old time flatty experts helping me put this little 284 together and make er spin.

    Actually started with a run through an old dishwasher haha. After that just cleaned with solvent and lightly wire brushed.
     
  3. Mikel50
    Joined: Mar 30, 2015
    Posts: 842

    Mikel50

    You’re doing such a great job on the rebuild ! Awesome thread Man ! Car looks killer !


    Sent from my iPhone using H.A.M.B.
     
    onekoolkat1950 and Shaun1162 like this.
  4. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

    Thanks man!


    Sent from my iPhone using The H.A.M.B. mobile app
     
    chryslerfan55 likes this.
  5. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

  6. ABONES
    Joined: Dec 3, 2004
    Posts: 952

    ABONES
    Member

    Looks great Shaun !
     
  7. killing it!
     
  8. Anderson
    Joined: Jan 27, 2003
    Posts: 6,392

    Anderson
    Member
    from DALLAS

  9. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

    Another piece to the puzzle...

    @603norm was kind enough to donate a passenger rear door from a Fordor to help fix the drivers side.

    I was a little reluctant to use it because it was a pretty decent door (hope nobody reading this was looking for one!) and I wasn’t sure if I was clever enough to make it fit.... But I think it’s turning out decent:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Sent from my iPhone using The H.A.M.B. mobile app
     
  10. Awesome work.
     
    chryslerfan55 likes this.
  11. cactus1
    Joined: Apr 10, 2006
    Posts: 8,449

    cactus1
    ALLIANCE MEMBER

    Looks great! Pretty soon you won't be able to call it a jalopy anymore!
     
    Last edited: Mar 1, 2018
  12. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

  13. catdad49
    Joined: Sep 25, 2005
    Posts: 1,806

    catdad49
    ALLIANCE MEMBER

    Dang, now you've gone and made a Hot(r) Rod out of it!! If I was a little younger ( and lot more talented), I'd be out there looking for an old jalopy to rescue. Do I see TROG in the future!? Next you be putting another seat in it, but no matter what I Still Love It.
     
    Shaun1162 likes this.
  14. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

    Final patch panels arrived, along with 12” of snow...

    [​IMG]

    Overall no big surprises with the body... but I now remember a few other aspects that need to be fixed. Not sure if I should have the gas tank cap exposed, or lower the tank and have to open to trunk to fill it?

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    They certainly didn’t forget the red wrench with the rear end of the car either. Of course I cut the top weld where the trunk met the tail piece, and now the “deck lid” is too short.... Looks like they added an angled filler piece at the bottom.

    Should I pound out the dent and weld on another filler, or just make a new deck lid? Planning to make it easily removeable this time.

    [​IMG]
     
  15. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

    Thanks for the kind words. The aesthetics have certainly changed a little bit, but deep down it’s still an old beater race car. Gotta leave a lot of the dents and bruises, can’t make it too nice after all. Not a lot of talent here, more of a pretend bodyman!

    If the stars align, TROG ‘18 is the goal. I’d like to finish the body and paint it as soon as I can so that I can submit. Hopefully the Oilers like this refined version a little more!


    Sent from my iPhone using The H.A.M.B. mobile app
     
    catdad49 and cactus1 like this.
  16. King ford
    Joined: Mar 18, 2013
    Posts: 979

    King ford
    ALLIANCE MEMBER
    from 08302

    Love your build Shaun, I am a LONGTIME dirt track guy and remember well the end of the coupe and coach era most were 37-40 era however...I myself never cut one up but I did cut up a couple of camaro's ! Maybe someday I will kick myself for that as the original " builder" of yours may regret the torch work today!
     
    Shaun1162 and Nailhead A-V8 like this.
  17. I think you answered your own question add a 2" piece and you're done...what about repairing the sail panel and moving the filler neck slightly back so it's a just a hole in the lid? that way the basic shell is mostly original, you retain race car flavor, and don't have to open it every time you re-fuel
     
    Last edited: Mar 10, 2018
  18. onekoolkat1950
    Joined: Mar 23, 2008
    Posts: 1,852

    onekoolkat1950
    Member

    Looking good!


    Sent from my iPhone using H.A.M.B.
     
    Shaun1162 likes this.
  19. 40ragtopdown
    Joined: Jan 13, 2015
    Posts: 735

    40ragtopdown
    Member

    Car is looking good to bad the think it can run on dirt but not on sand maybe Elmarage that's dirt right?
     
    Shaun1162 likes this.
  20. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

  21. TBone69
    Joined: Aug 21, 2007
    Posts: 752

    TBone69
    Member
    from NJ

    Fantastic transformation hope to see it at TROG 2018


    Sent from my iPad using H.A.M.B.
     
  22. Shaun1162
    Joined: Feb 22, 2010
    Posts: 777

    Shaun1162
    Member

    Ha. Nah. Unfortunately I think I need to change the title to this thread.


    My coupe and I are just not TROG material, I guess.
     
    lodaddyo likes this.
  23. jgrohio
    Joined: Aug 11, 2011
    Posts: 145

    jgrohio
    Member
    from NE Ohio

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2013 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.