Register now to get rid of these ads!

31/32 Chevy/Pontiac frame specifications?

Discussion in 'The Hokey Ass Message Board' started by mpls|cafe|racer, May 12, 2009.

  1. mpls|cafe|racer
    Joined: Jun 18, 2006
    Posts: 1,323

    mpls|cafe|racer
    BANNED

    Anywere I can find these?

    Please contact me if you have somewhere to get a drawing of these frames.

    Thanks!
     
  2. what do you need, got a virgin 32 frame?
     
  3. BigMikeC
    Joined: Apr 18, 2006
    Posts: 449

    BigMikeC
    Member

    I believe that coupes and sedans used the same frame. But the Pontiac wheel base was 6 inches longer than the Chev. I should get one for my Pontiac.
     

    Attached Files:

  4. mpls|cafe|racer
    Joined: Jun 18, 2006
    Posts: 1,323

    mpls|cafe|racer
    BANNED

    General dimensions to build off of is what I am looking for really. I don't have my poncho here to take measurements off of, so having the stock dimensions would be awesome.
     

  5. mpls|cafe|racer
    Joined: Jun 18, 2006
    Posts: 1,323

    mpls|cafe|racer
    BANNED

    Looks like my project without doors. I have access to fenders, but I don't know what I'd do with them.
     
  6. East Troy is only 20 minutes south of me....if your in the area, feel free to stop by and take the measurements you need
     
  7. JeffreyJames
    Joined: Jun 13, 2007
    Posts: 16,612

    JeffreyJames
    Member
    from SUGAR CITY

    Watch out, PBRmeASAP is a Pet-er-Ass!!!! Your entering a world of pain!!!

    "Shut the Fuck up Donny."
     
  8. mpls|cafe|racer
    Joined: Jun 18, 2006
    Posts: 1,323

    mpls|cafe|racer
    BANNED

    I'll be in Pewaukee. Where is that in relation to you?
     
  9. mink
    Joined: Oct 4, 2007
    Posts: 1,315

    mink
    Member
    from CT

    Its a 128" wheel base , im quite sure of. My chassis was extended to the 32 wheel base dimension. Lets see a picture of your cafe racer
     
  10. mpls|cafe|racer
    Joined: Jun 18, 2006
    Posts: 1,323

    mpls|cafe|racer
    BANNED

    Old one....

    [​IMG]

    Another one...

    [​IMG]


    Current state of the above..... did a lot of framework and stuff, upgraded suspension, etc.

    [​IMG]


    So there you have it.

    Thanks for the info on the frame BTW. I'm thinking I will try to catch up with PBR and grab some pics/measurements.
     
  11. sheet....Pewaukee's a hop, skip, and jump away. Plus your really close to the Kilti. I'm about 15 minutes east of Pewaukee off I-95. Grew up in that area....

    PM me and i'll get you my # and directions....

    also don't listen to MR Jeffery....i'm kinda sweet on him....
     
  12. dytryen
    Joined: Jul 27, 2008
    Posts: 391

    dytryen
    Member

    Got a '31 chebbie.....virgin. What measurements u need? Koo. I rather push my Chevy than drive a Ford. LOL. All good.
     

    Attached Files:

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.