Hi! im new here and from finland so try figure what im writing Im building 'ratrod / hotrod' engine to my -61 brookwood thats what i have: Block is: 14010201...305...80-85...2 bolt and its 0.30 over (310cid) Pistons are dished so they are something like +14-15cc? Heads are 14022601...80-86...267/305......1.84"/1.5" valves, 53cc Im gonna do some cleaning and gasket matching to heads and fix valves etc. I bought weiand tunnel ram w 2x450cfm holleys. Im gonna use 0.015 headgasket to get cr up to 9.5 well just wondering what camshaft i should use? my trans is th200r4 and gears 3.73 open thanks! All comment are wellcome!