Technical 250 In-line 6

My mounts won’t work they are from the 91 with the old ironduke 2.5. I wish tho.
I ether half to move radiator forward or cut a hole in the firewall to make this beast fit...


Sent from my iPhone using The H.A.M.B. mobile app

 

I have to agree the carb needs a good soaking and rebuild. One quick check is light tap the carb and try it. I had a 2 barrel acting up with fuel rapped it one time and great from then on.

 

What are you installing it in? Pictures would help also.

 

Yes your right I will soak and rebuild tomorrow morning. I hope it goes well and I love your picture lol


Sent from my iPhone using The H.A.M.B. mobile app

 

Raining like a son of a b**** or I would go show you guys my love... 91 s10 square body with a 700r4 tv cable contraption lol I’ll get pictures here soon I promise.


Sent from my iPhone using The H.A.M.B. mobile app

 

Seven hills are you by seven hills distillery here in bourbon country?
Your name makes me thirsty....

Sent from my iPhone using The H.A.M.B. mobile app

 

not a 91 s10, it's a 51 chevy
https://www.google.com/search?sourc...wiz.......0j0i131j0i10j0i22i10i30.PXwfTR1Vik4

 

Ohhh never mind you mean the vehicle in general lol yes it’s a 51 Chevy the original design for the s10.
The s10 is just a cheaply made 51 hahah you got me so confused
You just trolled the hell out of me hahahha

Sent from my iPhone using The H.A.M.B. mobile app

 

Good luck Will,if I was closer I'd help you.These carbs are really simple you should be able to rebuild it yourself.

 

Thank you I appreciate your help
I do also agree that the carb is not complex I got google if I’m confused.


Sent from my iPhone using The H.A.M.B. mobile app

 

O.k., now it's beginning to make sense! Try Langdon's Stovebolt 6, seems like he used to offer mounts to swap out the old 216 with the later 230, 250 & 292's. If he doesn't have them, I'm sure he will point you in the right direction. He's a real nice guy! His web Site is www.stoveboltengineco.com.

 

Thank you mr grumpy I appreciate all your help today I will check out the site right now!


Sent from my iPhone using The H.A.M.B. mobile app

 

Do you guys know if this is the whole rebuild kit for the Rochester 1bbl 250 carb


Sent from my iPhone using The H.A.M.B. mobile app

 

Not much room in your, um, '51. Plan on some serious clearancing with a hammer for that trans, even a turbo 350 will require it. It sounds like the radiator will need to move ahead also, google the engine measurements if needed. Those are great motors, I loved the ones I've had.

 

Also, that does look like the kit you need.

 

I don’t know how that picture got their mr grumpy sent them to the chat and now it’s the wall photo omg ):


Sent from my iPhone using The H.A.M.B. mobile app

 

I’ll add my photos tomorrow. hopefully the 53 Chevy photo goes away so I don’t accidentally piss off mr. grumpy.....


Sent from my iPhone using The H.A.M.B. mobile app

 

No...you're thinking about Lynchburg Tennessee, home of Jack Daniels whiskey.
I'm from Lynchburg Virginia, home of Fleet Enemas.

 

Omg I just pissed bourbon I’m my britches...
Almost as good as saying coffee enemas



Sent from my iPhone using The H.A.M.B. mobile app

 

The H.A.M.B more like the F.A.M.I.L.Y I NEVER HAD


Sent from my iPhone using The H.A.M.B. mobile appFamily