Register now to get rid of these ads!

2 barrel carb riser

Discussion in 'The Hokey Ass Message Board' started by wickedfastrides, Jun 21, 2013.

  1. wickedfastrides
    Joined: Nov 15, 2009
    Posts: 5

    from colorado

    Anybody know where I can get carb risers for a Rochester 2gc ? I have a 4 x2 manifold that I want to bring the carbs up higher on. The carbs and the manifold are 4 bolt . Thanks
  2. Tony
    Joined: Dec 3, 2002
    Posts: 7,350


    I dont know where they can be bought, but they can be made fairly simple with a chunk of aluminum. I made some years ago for a tri-power i had.
    If you dont have access to a mill, a local machine shop should be able to whittle them up for you.

  3. daliant
    Joined: Nov 25, 2009
    Posts: 700


    Hell, even a local carpenter could whittle them up for you, hardwood makes good carb spacers.
  4. Deuces
    Joined: Nov 3, 2009
    Posts: 24,159


    .... And the wooden ones help keep the carbs cool from the engine heat...;)

  5. hoop98
    Joined: Jan 23, 2013
    Posts: 1,362

    from Texas

  6. Try Dickster here on the board. He'll hook you up. I got some from him.
  7. gasserjohn
    Joined: Nov 9, 2008
    Posts: 1,218


    Dashman here on hamb......
    made these tunnel ram spacers&phlonic spacers as well.........

    Attached Files:

  8. Badrodder
    Joined: Aug 27, 2011
    Posts: 51


    I think Dashman has the on Ebay...........
  9. dashman
    Joined: Apr 15, 2009
    Posts: 774

    from Viroqua WI

    Here is one that we in aluminum. We make them in phenolic at 1/4" and 1/2" thick and aluminum starting at 1/2" up to 2" tall. I have made them up to 4" tall for some customers.

    Dashman's Hot Rod & Speed Parts

    Here is a pic.

    Attached Files:

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.