Register now to get rid of these ads!

1955 F100 Project- HIGH End Metal work!!

Discussion in 'Cars For Sale' started by 55styleliner, Oct 19, 2017.

  1. 55styleliner
    Joined: May 11, 2015
    Posts: 558

    55styleliner
    Member

    City: Leander

    State: TEXAS!
    Price: $9500

    SOLD!!!


    1955 F100 Project started towards the concept image:

    Link to gallery https://www.customsandhotrodsofandice.com/project_gallery/55-f100

    Metal work all completed by Ridler winning shop CHRA www.chratx.com
    Hundreds of hours (almost 1,000) of metal work in the cab and hood.
    Big back window kit installed
    Smooth recessed Firewall
    Cowl filled
    Roof chopped, pancaked and lengthened to have a '56 like eyebrow (second photo compares stock to this truck)
    Hood pancaked
    Rust repaired in cab corners and lower cowl areas
    '54 Ford car dash

    I have many parts that go with it including:
    New billet hood hinges
    2 sets of panel truck quaters
    excellent Panel truck running boards
    very nice grille
    1954 Ranch wagon quater panels
    Mid 80's stepside bed
    new tailgate
    new bed wood and polished strips
    dropped front axle
    '57 9" rear axle
    and too much other stuff to list
    No engine or trans, hadn't made up my mind yet.

    Clear Texas Title in my name! I have the original warranty plate with the VIN on it. The frame I have the VIN does not match, I intended to use an aftermarket frame in the build. I am just using the old frame to get the mock up done. to a point.

    Will consider Harley or interesting old car trades.

    IMG_0077.JPG
    467117_480034805401703_742612720_o.jpg chop 4.JPG chop 5.JPG IMG_0158.JPG
     
    Last edited: Nov 13, 2017
    Ralphies54 and kidcampbell71 like this.
  2. 55styleliner
    Joined: May 11, 2015
    Posts: 558

    55styleliner
    Member

    The metal work has not begun on the bed, I just lots of pieces and parts gathered to make the job as easy as possible.
    Again, too many new parts to list like power window kit, new side glass, billet hood hinges, etc. I have a lot of money invested in this project and would like to see it finished. I am just not going to get it done. If you have the means to finish it, make me an offer, I will listen to any reasonable offer.

    Clear Texas Title in my name! I have the original warranty plate with the VIN on it. The frame I have the VIN does not match, I intended to use an aftermarket frame in the build. I am just using the old frame to get the mock up done. to a point.
     
    Last edited: Oct 23, 2017
  3. 55styleliner
    Joined: May 11, 2015
    Posts: 558

    55styleliner
    Member

    There is $1000 worth of new Oak bed wood, polished stainless WOW strips (hidden fastners) and a new plain flat tailgate.

    The panel truck running boards I have are the nicest you could hope to find. I have seen similar sets sell on eBay for $1500.

    $300 power window kit, $250 Bear Claw latch kit, $600 Billet Hood Hinge kit, $600 Drop front axle
    $400 1957 Ford car rear 9" $250 Perfect original 1955 F100 grille
    $500 1982 F150 Step Side Bed (complete) to use as structure to build the bed $400 one piece side window glass kit.
    $500 Big Window metal $500 Firewall

    So, that's roughly $7,000 worth of parts that I have not including the cab, Panel quarters, hood, fenders, dash etc and so on.

    Call with offers. Todd. 512-791-2173
     
    Last edited: Oct 30, 2017
  4. 55styleliner
    Joined: May 11, 2015
    Posts: 558

    55styleliner
    Member

    May consider parting out. Call with needs. 512-791-2173
     
    Ash- likes this.

  5. 55styleliner
    Joined: May 11, 2015
    Posts: 558

    55styleliner
    Member

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.