1953 chevy build by Meyer Chassis

Here is our build of a 1953 chevy 3 window. We started a month ago and so far we completed the step notch set up the four link and finished the tube work mounting the bags off the lower links.set up a custom mustang II front end and mounted the rack and front rotors and calipers.

 

Got the truck off the frame jig today and on the ground...finished up the steering notched the frame horns and set it on the ground

 

Picture of the four link setup. 90% done.

 

Lovin the 4-link setup looks tits..

 

Going to be mocking up the motor and trans next week plating in the rest of the frame and building motor and tranny mounts.will post more picks next week. Thanks guys

 

Got the body mounted today and the motor and tranny mocked up ..ready to fab the motor mounts

 

Fabricated the motor mounts..

 

Picture of the chassis..Boxed in the frame.....Removed all the junk off it..ohh and had the 5.60 Firestone Whites mounted on a set of Gloss black Powdercoated 1953 car wheels

 

Finished up the lower link arms and mounted the bags. Next is mounting the air tank gas tank and compressors