1949 Buick scaredbird brake master cylinder

Hi there
I'm building a 1949 Buick super sedanette and i have used the scaredbird disk brake front conversion, and I saw that they have a dual master cylinder that retains the stock brake pedal. Is it a direct bolt on item or does it require additional brackets? On the web site it show a three bolt pattern on the chassis. I was wondering if anyone has used the set up.
I can't seem to message them via the HAMB app.
Cream Darren


Check out my 49 Buick sedanette build

 

mark is hamb member pm him.

 

I doubt he would sell you anything incomplete.

You can always ask him: http://jalopyjournal.com/forum/members/scarebird.20315/

 

I wouldn't doubt him I'm stoked with the disk brake set up.



Check out my 49 Buick sedanette build

 

That link does not work for the app,


Check out my 49 Buick sedanette build

 

I just tried it from the Android app. It went right to his profile.

 

I would be interested in what you find out about a setup that uses the original pedal. I am about to tackle that issue on my 49 Sedanette.

 

Buggered if I know it still won't go straight there but I searched for him and found him, I can't seem to message him via the app or online for some reason, I won't allow me to.


Check out my 49 Buick sedanette build

 

Aus Buick, I tried to "start a conversation" with him as well. I was also blocked. There is something about his account that is set to keep you from doing it. You can go to www.scarebird.com and send him an email via "contact us". BTW, tell him that his PMs on the HAMB are being blocked. He may not want it that way.....or he may have set it that way intentionally.