Considering selling before I dive in any further on this project: Will make a nice hotrod with a little work Willing to sell with or without engine. Very little rust, worst of it is in the tool tray and tail pan. Area around the rear bumper irons will need some repair as well. I have a new replacement tailpan. Have a 283 sbc or a 49-53 flathead I can let go with it as well. Both will prob at least need to be checked over possibly refreshed. Original 39 trans Chassis has been cleaned/painted chassis black All new brake lines/shoes/cylinders, etc Has 40 brakes/hubs 17" wires with decent white walls I could possibly include the '40 wheels and firestones for the right deal Has front drop axle and reverse eye spring, rear crossmember has been lowered and de-arched spring. Other parts included: Older repro grille(have original as well. It's pretty beat though) New aluminum radiator New window seals New trunk lid seal New battery tray kit (drake) New welt for fenders/running boards New wood front floors (Roy Nacewicz) Box of new fender/body/hood/various other hardware from Roy Nacewicz Lots of other new odd/ends The body is solid, the body is in bare metal, the sheetmetal is off of it to prepare for bodywork. Passenger side fender is nos. DS rear fender needs some minor repair All trim is included. Dash is really nice, as is the steering wheel/column Also have SPI epoxy primer kit I throw in . Original seats are included but will need redone. Give me a call/text if interested can send and detailed photos etc. Thanks Nick 859...398...0176