Register now to get rid of these ads!
Auctions

1937 Ford Pickup

Discussion in 'Cars For Sale' started by Xtrom, Feb 9, 2017.

  1. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

    City: Forman

    State: North Dakota
    Price: SOLD
    1937 Ford pickup project. Started life as a 1.5 ton truck that I put on a 1935 pickup frame and added a 1935/36 pickup box to as well. Frame was rusty so I cut out the rust on my frame jig and replaced the metal and boxed it in the rear where the rust was. Also flattened the rear crossmember at that time. Transmission is a 1933 Ford car that shifts through the gears fine. Engine is a 1937 21 stud that is locked up. Just used the engine and transmission for a mock up. Front and rear axles are 1935 units along with the wishbones. Rolls and steers. Has a 1935 Ford car steering column and banjo steering wheel in place. This pickup has probably the nicest 1937 grille I will ever find in my life and hate to let that go. The hood has some waves on the top and a couple bars cut out on the drivers side by the cowl for some reason. The cab is pretty nice. Doors open and latch great but there is some dings on the roof from being a farm truck and there is rust in the windshield header area. Rockers, cab corners, subrails, dash are all nice. Gauges are there but it has the wrong glovebox door for some reason. Box was a really rough box that I straightened as best I could and put angle iron subrails in place and tacked it to the frame in the proper location. Passenger side of the box has a fair amount of rust in the lower section. 20170208_211747.jpg 20170208_211219.jpg 20170208_211227.jpg 20170208_211242.jpg 20170208_211249.jpg 20170208_211254.jpg 20170208_211311.jpg 20170208_211332.jpg 20170208_211343.jpg 20170208_211350.jpg 20170208_211352.jpg 20170208_211358.jpg 20170208_211435.jpg 20170208_211457.jpg 20170208_211542.jpg 20170208_211545.jpg 20170208_211553.jpg 20170208_211722.jpg 20170208_211801.jpg 20170208_211806.jpg 20170208_211810.jpg 20170208_211826.jpg I also added tongue and groove floorboards made from old truck box sides. I made new wood cab mounts as well from drawings I found on here. I have a clear 1937 truck title for the pickup. I will not part this out. Located in SE North Dakota. I can assist in loading as well.
     
  2. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  3. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  4. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND


  5. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

    Bump. Trades? Offers?
     
  6. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  7. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  8. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

    Just add your engine and juice brakes!
     
  9. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  10. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

    Just add your engine and brakes!
     
  11. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  12. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

    One more try before it goes on eBay.
     
  13. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  14. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  15. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  16. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  17. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  18. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  19. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  20. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

  21. Xtrom
    Joined: Mar 23, 2010
    Posts: 1,029

    Xtrom
    ALLIANCE MEMBER
    from Forman, ND

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.