Ad has been updated with additional pics and I've added parts in the sale. 1937 Chevy, 2 Door Master Sedan. I've owned it almost 30 years. Was a great driving original car up until 2001 when it was taken off the road for vintage hot rod upgrades. Unfortunately, other projects have had priority and my interests have changed. I'm selling the car as a roller without an engine but with many upgrades. - New Wheel Smith black powder coated artillery wheels , 15"x 5"/15"x7" - New H Speed rated 165x15/ 235x15 tires - Repro Chevy Caps and rings - Chassis Engineering rear suspension kit: springs/shocks/sway bar - 10-Bolt, 8.5 Nova Rear End - 6" dropped tube front axle, 54 Chevy Spindles/brakes, Posies dual-Flex springs, Sway bar. Additional parts include - Aluminum Radiator - Chassis Engineering Front engine mount and rear transmission mounts - Set of repro 1938 Front and rear bumpers - Hood ornament and grill emblem - Set of 5 seat belts - Left and right tail lights Body and frame are great. The driver's side floor will need a patch panel and there is a small area in the trunk floor that will also need a patch. I believe the car had a repaint at some time using the original color. The body has minor dings, scraps, and dents but nothing bad. It actually looks really nice at a distance. There is some cracks in the glass. The doors, windows, trunk, and hood all operate great. The interior is all original. The rear suspension is fully installed and pretty much ready, the front end is roughed in and needs finishing. The brakes are not finished. The car rolls and steers. The car has a Utah title and it is in my name. $8900.
Lowered to $7900. The parts add up to about $4500. It would be hard to find a better, more solid starting point for a streetrod project.