It has been three months since my last update, and a lot has happened. Tried to get the chassis back on the frame, just to check som clearance issues. After several tries, I desided to try and make an extention for my enginehoist. Ehm, What the hell am I trying to do? This will not hold. And I was right, it bended right away. SÅ scrapped that idear, and got some pieces from the leftovers of the barn. recykling is a good thing. A friends van became a good anchorpoint. And with the engine hoist in the other end, I was able to raise the body, enough to roll the frame under. Perfectly parked. hehehe And so starts the fun, I need to make sure that the frame and body dont crashes in to many places. I know that I need to make some clearance under the rear seat. Yup, Knew it, but it was less than expected. Hmm, Cleaning time A bit of cutting here. And after 5 minutes with the grinder, the clearance was in order. After some checking under the car, I found a few more spots that needs clearance.