Register now to get rid of these ads!

1934 pickup project

Discussion in 'The Hokey Ass Message Board' started by 34ratpickup, Aug 3, 2010.

  1. 34ratpickup
    Joined: Mar 9, 2010
    Posts: 117

    34ratpickup
    Member
    from Orange, CA

    Its already close to the four link. When the suspension bottoms out there is an inch of clearance between the two.
     
  2. VoodooTwin
    Joined: Jul 13, 2011
    Posts: 3,455

    VoodooTwin
    Member
    from Noo Yawk

    ^ that's some cool attention to detail!
     
  3. Thanks man, here is a sideshot:
    [​IMG]
     
  4. 34rat, your fabrication is tight!
     
  5. 34ratpickup
    Joined: Mar 9, 2010
    Posts: 117

    34ratpickup
    Member
    from Orange, CA

    well last night I get the bed welded up and have all the bed bolts drilled and are ready to be assembled. The bed just needs a coat of paint to hold me out until I tear the truck down to clean up the entire body.

    [​IMG]
     
  6. i have a hood if ya need one
     
  7. Dirty Mike
    Joined: Sep 15, 2011
    Posts: 2

    Dirty Mike
    Member

    I had a radiator shop make me a radiator to fit my grill shell for around $200. put the outlets and filler cap where I wanted them. It's 4 core, brass radiator
     
  8. 34ratpickup
    Joined: Mar 9, 2010
    Posts: 117

    34ratpickup
    Member
    from Orange, CA

    Been a while since I have posted on this thread. But last month I pulled the drivetrain out of the truck and had the trans rebuilt and completely went through the motor. The motor is going to dynomotive on tue to get broken in and tuned. Can't wait to get it back on the road. ImageUploadedByTJJ1358745302.908841.jpg
    Picked up a tri power setup for it also



    Posted from the TJJ App for iPhone & iPad
     
  9. ss34coupe
    Joined: May 13, 2007
    Posts: 4,178

    ss34coupe
    Member

    I like the work you have done here. Good job!
     
  10. vendetta
    Joined: Mar 22, 2007
    Posts: 125

    vendetta
    Member

    nice work! do you have any side on profile photos of the truck you could post? cheers
     
  11. triumph 1
    Joined: Feb 9, 2011
    Posts: 579

    triumph 1
    Member

    Nice work, very cool truck!
     
  12. 34ratpickup
    Joined: Mar 9, 2010
    Posts: 117

    34ratpickup
    Member
    from Orange, CA

    Here are some side profiles of the truck before the drivetrain was pulled
    ImageUploadedByTJJ1358958209.447291.jpg


    Posted from the TJJ App for iPhone & iPad
     
  13. 34ratpickup
    Joined: Mar 9, 2010
    Posts: 117

    34ratpickup
    Member
    from Orange, CA

    ImageUploadedByTJJ1358958301.158439.jpg
    ImageUploadedByTJJ1358958358.173467.jpg


    Posted from the TJJ App for iPhone & iPad
     
  14. Pfireproof
    Joined: Feb 20, 2014
    Posts: 2

    Pfireproof
    Member

    Still for sell?
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.