1932 Ford pickup project. What I have is a 1932 Ford cab that has been disassembled. This translates to the lead has been melted and the panels have been removed from the inner structure. Was going to create reinforcements and perform rust prevention. The back is from another cab and has a cut out on lower portion, since it came from a channeled truck...very repairable. The doors are very nice too. Nonetheless, I moved a few years ago and have never been able to relocate the project. Therefore, it must go. In addition to the cab, I have a reproduction floor pan, reproduction side support rails, an extra roof, a 32 car cowl, and a perimeter frame by Lobeck's. The perimeter frame is boxed, stretched 2", raised 2", rear C notched, and a Pinkee's Rod Shop flat front cross member. Additionally, I have some early Ford rear end bells and a pair of early Ford rear ladder bars. The car is located in Topeka, Kansas and I do not have a title for it. Asking $5500, but open to offers. Please let me know if you have any questions.