Has anyone picked up where Industrial Chassis stopped with the crossmember legs. They were to connect the crossmember to the rear frame area. Thanks
In Fridays parts for sale section on here there was a guy from England offering some nice looking deuce legs.
Do a search on here for the pinstriper that's his handle and his stuff looks very much like Industrial Chassis parts.
Thanks for the recommendation Krylon. This is our version- the customer I built chassis for approached us with a set of chassis inc legs. We changed the design heavily to get them to fit how we thought was a big improvement. here is the chassis build thread if you wish to look through what we have been upto https://www.jalopyjournal.com/forum/threads/32-chassis-build.1179816/page-2 9 by joe curtis, on Flickr for sale thread here https://www.jalopyjournal.com/forum/threads/32-chassis-brace-kit.1192452/ Thanks Joe
Are you thinking of buying some of these strengthening legs.? If so, maybe we could buy together and save some bucks on shipping etc. I'm your neighbor down in Vancouver, WA.
I have the kits all boxed up. I can’t box 2 sets due to sizing and weight. The 2 factors which make the shipping considerably more expensive per KG. I have put a lot of effort into packagaing as best I can to use the smallest of boxes possible to make shipping easier, and cheaper for all of the guys around the world. the system I book parcels on tells me there is NO duty or import to be paid on the item once it’s your end, due to the value being under the threshold. These work out at about $525 to your door, with 3-5 day shipping.