Project coupe for sale. Very well done 3" chop (that saves you a lo of money or time). Needs typical patch panels. Most of the needed panels are included. Wheel well panels are included but I didn't get a picture of them. Here's the list. Title Frame - shows some previous repair/ If you don't want this frame, I have another rolling frame from a 29 A that we can deal on. Body - This body looks to have been slated for a racing future due to the reduced cowl and the cut outs for headers on an engine with a severe set back. Doors (already chopped to fit body) Decklid - Pretty good decklid. Splash aprons - These are very good (comes painted) Windshield frame - Will need to be chopped to fit the coupe's chop Hood - Your choice of full hood or just a top hood with braces Stock front suspension with old-time spring drop S-10 rear end - These are prefect for A's or T's Nice Grille Shell Extra Cowl and A pillars to complete the missing pieces from the original cowl if you choose not to make a fuel coupe out of this. 1939 Ford dashboard - Narrowed to fit this coupe Extra Cowl Top - This has a Deuce cowl vent added Unsplit Stock Front Bones - Also comes with the split kit Radiator - Already setup for SBC Radiator support rods - From firewall to radiator Headlight bar I do have some sub rails too. Forgot to take pictures of that stuff. And any other 1930-1 Model A stuff laying around the barn that I can find. If you want more pictures, just PM me.