This is a new Brookville 1929 Ford Roadster project, with almost every option they offer. Included is a new Brookville roadster body with smooth cowl, recessed firewall, and '32 style dash. The original builder was going to louver the deck lid, so the inner & outer deck lid skins haven't been assembled. Also included is a Brookville built 29 chassis, with their chrome & stainless option. This includes their complete chrome & stainless 4" dropped Magnum front axle with spindles, TCI 4 bar kit with chrome spring, shocks, tie rod & drag link, stainless rear TCI 4 bar kit with new chromed 9" Ford housing, new loaded 31 spline axles (no center section) and chrome coilover shocks & panhard bar. Also included is a Magnum front disk brake kit (plain finish) with new rotors & calipers, and new loaded rear backing plates with new drums in the rear. Also has new master cylinder & pedal, braided steel brake lines and necessary plumbing supplies, and chrome / stainless steering column mounting hardware and pitman arm (no column or box). Has new 2" chopped windshield frame & posts, new Walker radiator and 29 grille shell. Also included is a complete Brookville fender package with smooth running boards. Several miscellaneous small parts such as body mounting blocks, sill plate covers, latches, tail lights and stainless rear spreader bar. This package was over 21,000 from Brookville, not counting shipping & crating charges or the chrome 9" housing. I unboxed most of the large stuff for the first time to take these pictures, and most of the hardware and small parts as well as the radiator have never been opened. All of the body & suspension parts are made by Brookville, Magnum, TCI, or Pete & Jakes. This is all top of the line stuff, not cheap knock-off parts. I am asking 16,000 for everything pictured, may consider trading on original 1932-1934 Ford parts or project. No title. Thanks..Sam Sale Pending...
The Jalopy Journal
