I have a clear Model A sedan title in my name that will go with this car. The fenders, hood, grille and drivetrain are from a 1928 Fordor. The wood was shot so I put a 28 or 29 tudor body on the Fordor chassis. Has 15" later Ford (1961) F100 wheels and 1948 or so hubcaps installed on the wheels. I had the engine running in the summer of 2018 but it made some noise. Might need rod bearings, might just be something loose in the pan. I never checked into it. Anyway it's a loose rebuild-able engine at minimum. The body has the usual rust for the midwest. It was pushed in on the back but I hammered it out some. Would be a good project. I have a spare back half of a body that is very nice that could possibly be negotiated in as well. Again, I do have the title I will include with the car. I'm located in SE North Dakota. Might entertain a trade on some early iron or hot rod parts.