The Jalopy Journal
Hi all, this is my first post on the site but I am a long time lurker. I’ve been working on my project, more specifically replacing a blown...
SOLD is a set of nice 1942-'48 rear backing plates. I'd like to get SOLD shipped for them in the lower 48. [ATTACH] [ATTACH] [ATTACH]
Hi I purchased the puller in the image bis ebay and per the instructions, the castle nut is to be flipped and screwed vack on "flush" with the...
You ever worked on something so long that you wished you never started. Well, I have, and this is what I did. Put disc brakes on the rear of my...
I have a 1948 GM Velox - I am running a L300 front end with discs and borg warner diff (chrysler) with drum brakes. I am reaching out because I...
I've spent the past year searching for four good used '40-'48 drums for my Model A. So far, I've collected one—possibly two—that are passable....
NOS Kelsey Hayes. I trying to check a part number and am unable to cross. I believe they are for Ford / Mercury juice brakes. 5 om 5-1/2 bolt...
[ATTACH] Early Ford square back spindles with disc brake adaptors and brakes. As taken off my 34 Ford.
I put disc brakes on Ford 9 rear. With 2 lb. valve inline front and rear . Adjustable proportional valve towards rear after the master cylinder....
Unbolted from a genuine 1932 Ford frame. I'm looking to get $75, buyer pays shipping. [ATTACH] [ATTACH] [ATTACH]
Selling all as a lot.[ATTACH]
1935 Ford Panel Delivery installed rear disc brakes. Had the normal brass proportional valve when I had disc/drum brake system. Rear discs has the...
So this is what i used to get rid of the treadle vac system on our 1954 lincoln capri cost about 200 bucks total. While we were at it replaced...
Hi All, I’ve got a quick question if anybody can help, I’ve installed a scare bird front brake conversion kit on my 55 Olds and am using centric...
Banjo Parts 4.11 R&P - 10 spline pinion, nice shape. With or without differential guts. Axles? $100 [ATTACH] [ATTACH] Axle trumpets - Pitted...
Hey All! My wife and I purchased a 1960 Ford Falcon as my 1 year sober anniversary gift/project. Everything appears to be stock as far as I can...
sold
Newbie here to this board, but a long time reader. As title states, I have a question (scroll down if you wanna just read the problem), more of a...
I recently bought a hot rod built in the 50's that has been sitting dormant since about 1960. It is going to be a bit before I get it home and...
Selling a pair of drum brakes that came off of a running 1956 Ford Victoria. They are complete from the spindle out. They worked great, but I am...
I've recently purchased a '48 Ford Tudor that previous builder/owner has installed a Disc Brake front and running stock Drums in rear however I...
So the title gives the general idea, but let me cover the details. I just looking for ideas or to know what peoples thoughts are as far as how...
For sale is a CPP proportioning valve. It is untested but the price is $15 plus shipping.
To recap (if anyone cares) I have a 63 Olds Dynamic 88 I bought back in september. The stock booster was shot, and I wanted to convert to dual...
I cut the front off a running driving 1954 plymouth from california, so no rust. The brakes have been rebuilt recently with all new shoes and...
The continuing saga of my 63 Olds Dynamic 88. So far, I have: -Replaced the booster/master cylinder with a universal booster and dual master...
48-52 F1 Front Brakes. (Backing Plates, drums, hubs) What you see is what is included. I was told that they were pulled after 1,000 miles. $350...
Greetings, I've been gleaning the web for a hydraulic brake solution to fit a special I'm building with an Anglia axle and spindles. Not a bunch...
48-52 Ford F1 front hubs, inner bearings and grease seals, outer grease cups as pictured. Good races, bearings look good, seals are used. [ATTACH]...
I have a pair of new brake hoses that won't work for my setup, and it's been too long to return to Napa. Napa part UP36846. Banjo bolt and gaskets...
Separate names with a comma.