The Jalopy Journal
Tttt thanks
Still have it
UP
New Rear Bed Sill 1948( or earlier not sure)-Early 1950. Brand new MAC'S aftermarket # 64-66088-V780012C. my bed is the late 50 style so this will...
July 31st 2015 Croswell Michigan Cruise Night Featuring Jane Rose and the Deadend Boys to follow. All Vehicle types are welcome. Come out and...
I am leaning toward the wrong inner bearing/race i have checked the spindles on both sides for burrs. It is doing the same thing on both sides....
I am installing a CPP/speedway motors disc brake conversion on the front of my 50 F1. I installed all spacers and races according to the...
It's is getting to where the larger auto dealerships are doing this type of thing and having the mechanics take there own tools home for liability...
Send A PM to Singlefinger speed shop he usually advertises it.
I use a 55 gallon drum cut in half with an electric frying pan under it to heat it i set the heat control and use either dish soapr an industrial...
A sawzall,Go Pro camera and cab coners for the F1, Also large bill for what Santa gave to everyone else..
I used on that mounted to the water pum holes and the front manifold bolt. I belive it was from Jeg's it put my alternator about straight across...
They look like the shocks i put on the front of my car. They are drag shocks that work that way to hold the front end down
If you are looking for original style.I got mine from MAC's. castle nut and all.
They are closer to a buick or pontiac. the doors are longer and the body as a whole is longer. I am trying to put on back together also. If you...
Depending on how low you want to go it is much better to just use the original frame. A freind of mine was doing this same thing on a 57 using an...
Got mine today. The envelope was destroyed but the book was great shape. Thanks Ryan
Got mine today. The envelope was destroyed but the book is in good shape. I didnt even have to open the envelope to get the book out.
Just got into this same thing on a 62 stepside. Freind thought it was a bolt in deal. Turns out the perches needed to be moved in about 1 inch on...
Thanks
i am looking for a Pitman arm for a mopar manual steering box (67-74 car) That is staright and will accept the taped rod ends. Does any body know...
I have a 50 for f1 that i am looking at relocationg the fuel tank to the rear ofthe truck between the frame rails. I have seen this done before...
Great Phots just got home myself .. Forgot about the meet and greet again this year, Big Thanks to the Czars...Hard to find a Traditional rod and...
Thanks Guys
Is there cruisin Eldo on thursday night this year?
1958 chevy pickup 1957 Mercury Turnpike Cruiser Wagon
Thanks alot fellas a few that I have called have seemed much higher then last year..
Separate names with a comma.