The Jalopy Journal
Ok, so they are just connectors to separate the harnesses. Thanks! :)
https://www.mafca.com/downloads/Seminars/2018%20Reno%20Electrical%20System%20Alex%20Janke.pdf
I’m wiring my roadster and I have one question. At https://www.mafca.com/ I found simple diagram with turn signals but I wonder what are these...
I think I got the correct restriction orifice from mercury flathead. Thanks for the drawing, is it a full flow system?
I think I figured it out. There must be oil pressure in oil sender unit, so I will make line in to filter from the sender horizontal output and...
I’m planning to add a inlet from filter to block to the dipstick tube.
Here’ the filter of merc flattie.
At least in 1949 mercury flathead the oil flows from back of the engine to the ”oilpan”. More precisely to the side of the block. And the inlet is...
I have a stock 1937 ford flathead and would like to add bypass oil filter to it. What is the easiest way to do it when the car is already...
I have brass flexilines from old lamp in my model a, but I guess I would like to have something else in this one. :)
My first try is this.
What kind of wiring you would make with this kind of headlight stands? Piping of some sort, or what is the traditional way?
Thanks, I will do that. :)
Here’s the ring I’m talking about.
This is an old topic, but I didn’t want to start a new one. I have 32-spindles with these rings and they hit the seals in the drums. Can I just...
I bought a pair of 15x9” Slot mags and I wonder what is the manufacturer of them. No stampings except the number 52471 and letters E and B.
Did you modify the holes in the tank or in the frame?
I have a Vintique tank and the holes are not lining up. Also the filler neck is too close to the body. How close it should be? I don’t have a...
Thanks
Do you have any tips where to de-arch the spring?
No fenders, I have heard that they might break when pressing, but my spring was not original anyway.
Did you change the rear cross member too?
That was the first idea, but the frame is really good and I just try to avoid cutting it. If I don’t get it sitting right with spring changes,...
I’m quite sure it is from closed car. Does it have different shape than the roadster spring? Or just more leaves? How many leaves there is in...
I have a dropped axle in front, maybe 2,5-3” and I would prefer the rear to be down like 2-3” to compensate the dropped axle. I Don’t know if it’s...
I wonder how much I can lower the rear of 1932 ford with just changing the spring. I tried to turn the main leaf in press and left two leaves of...
Very old topic, but I looked this to get inspiration. And made something else instead. Here’s my design of latch attachment. I hope someone else...
Serviced and ready for the car. I welded a washer to the rod. Did not wan’t to make 100% restoration. [ATTACH] [ATTACH] [ATTACH] Sent from my...
It seemed to work fine. I heated it with the torch and smoothed the mushroom. Spring seems to be i bad condition. I wish I’ll find one long enough...
Separate names with a comma.