The Jalopy Journal
Started cutting into the old gas tank/gauge panel area to loose some weight. I'm just going to make a panel out of aluminum probably to go into...
[ATTACH] Sorry this isn't a very good picture but it is a jack bolt that I went through the tubing with and then welded a bung on the bottom side...
Thank you guys for the support and feedback, helps keep the motivation of building this car with this crappy cold snowy weather we have coming...
Thank you really appreciate it! 1931 Model A Coupe Gasser
I'm sure I'm missing some photos in here, but the cage is in besides the door bars and bar behind the seat, rear suspension is getting close to...
[ATTACH] Getting the front brakes together to make it a roller. [ATTACH]
[ATTACH] [ATTACH] [ATTACH] Got Jeff over to do some more tig welding for me, wish I could tig weld 1/2 as good as him.
[ATTACH] Front fender braces on the frame. [ATTACH] Both seats mounted. [ATTACH] Put it together partially for the meltdown drags this past...
[ATTACH] Passenger side header tacked together [ATTACH] Side view of passenger side header with collector. [ATTACH] Wheelie bar casters made....
[ATTACH] Making the mounts for wheelie bar off the rear end. [ATTACH] Getting the mounts aligned side for sure on the rear end. [ATTACH]
[ATTACH] Joe working on the passenger side header. [ATTACH] Jeff welding on the cage. [ATTACH] Kip working on the grille she'll for mounting the...
[ATTACH] Got the gas tank mounted. [ATTACH] Master cylinder in mounted [ATTACH] Sent from my SM-G955U using The H.A.M.B. mobile app
[ATTACH] Got the seats mounted and a driveshaft loop mounted. [ATTACH] Drivers side header is tack welded together. I wanted chassis style...
[ATTACH] Had a cage mocked in and it wouldn't have passed certification so had to cut it back out and redo it. This is the 2nd go around getting...
[ATTACH] The start of the frame work for the pedal assembly. [ATTACH] Pedal assembly tack welded in. Sent from my SM-G955U using The H.A.M.B....
[ATTACH] Cut some more of the firewall out to give it a clean look and room for the motor. [ATTACH] Better view of the drop in the trans cross...
[ATTACH] Had to remake the transmission mount to put a drop in it for it to line up with the 3rd member. [ATTACH] Got a new motor for it and...
Well I think it's time to revive this thread and get some updates on some cars. I haven't posted much on my car here in the past year or so, so I...
Well said customer service is huge
Hang in there, the money part sure does suck and the bad luck is even worse but the overall build of the car and the motor are a museum show piece...
[MEDIA] Sent from my SM-G955U using The H.A.M.B. mobile app
The wife and I have been lucky enough to tag along to the last 2 southeast gasser races with Jeff and his wife with the skairlane. Here is the...
Yes he will.
Awesome work, very cool and well deserved! 1931 ford model a coupe
Got the ladder bars built not fully welded yet but there together and on the car[ATTACH][ATTACH] 1931 ford model a coupe
Thank you quain i appreicate the advice. 1931 ford model a coupe
Got some more jobs done, mid plates made and mounted, cut and drilled ladder bar brackets for the front and tached them on. Next will be to start...
Separate names with a comma.