The Jalopy Journal
Does anyone know whether a Model A coupe or even a truck rear fender has the same outside curve and will fit a 31 tudor sedan? I realize that the...
Here's what I ended up with. (I tried to get to the rad with the loop, really ;) ) A combination of a modified bracket and a loop. thanks guys[ATTACH]
Thanks for all of your advice, guys. I'm going to have to do some planning this weekend.
I tried a loop and it seemed like there was so much resistance that the pedal didn’t want to return even with the springs. Mind you, it was a...
I'm got a situation where I need a short throttle cable - maybe 5" from firewall to throttle bracket. Complicating the situation is an offset of...
Discount code valid until June 27, 2021: 171533904130143847 5% off, as usual
Sorry, yeah I did mean the waves on the outer skin side....although I think the inner has some less severe waves. Stamping seems to be a...
I'm just wrapping the body work on my 51 Ford F1 doors and it occurred to me that I should try to remove the 'waves' in the sheet metal to which...
Come on, someone's gotta have a idea or suggestion on the proper mounting of the dog bones.
What's the proper installation of the Fulton dogbones? Should there be any contact between the 'inside' parts of the brackets and the vehicles...
Well, I got it done. My experience with the Dynaflux acid is a bit different from Gary's. It wasn't quite chrome-like after applying...more like a...
Does anyone know who the manufacturer of the repo visors is? I'm just looking to get a set of steel side brackets that I can mod and do exactly...
Does anyone know whether all 700/800 series dog bones were made from aluminum. (Without going out to the shop to check, I'm not certain which I...
Hey Gary Any suggestions where to get the dynaflux stuff? Up here in Canada there are no local distributors stocking it but they'll bring in a...
Any there any concerns with using a metal hacksaw blade to cut the stuff, or a hacksaw that has been used to cut mild steel in the past? What...
I'm trying to build a grille for a 65 TBird. It'll be similar to the original (except with 1/8 x 1/2") horizontal bars, but the verticals will be...
Thanks for the input guys Gary: do you have the manufacturer's name of the acid?
Does anyone have experience putting together a custom stainless grille? I'm going to use 304 stainless and would like to polish before any...
Does anyone know what these side brackets are typically made from? I need to extend mine slightly to fit in a 'deep' door channel.
Wraymen: do you have any info on this coil bracket?
I stressed over this for a while and then got to thinking - if I'm bending my own lines and flaring the ends, what difference does it make if one...
yeah, I see that too there and at Summit. Crap
Uh oh! Didn't realize that it was metric. That's odd that my 3/8" fitting (sample) threaded in just fine. hmmmmm
Any suggestions on how would you mount a fuel filter such as a Fram G3727? I'm planning to install along an un-boxed frame rail. I would think...
Thanks for the advice guys
With this universal tank, the connection to the pick up tube is going to end up near the middle of the vehicle (side to side), so I'm going to...
I'm installing a gas tank from one of the popular manufacturers for the first time and they're suggesting that I use flex line between the tank...
Does anyone have the part number of pigtails required to connect to the Taurus 3.8L fan?
There's 4" of clearance from the water pump pulley and downward and there's at 6" of clearance above the pulley. I have to use an electric fan,...
How deep should a shroud be? I'm thinking something along the line of Mr Strode's above (nice one btw)
Separate names with a comma.
The Jalopy Journal
