The Jalopy Journal
I am looking at a vehicle in Colton CA and I can't seem to get my uncle to get eyes on it. He doesn't have a license and is waiting for my aunt to...
1933 34 complete garnish molding set. In good shape with slight surface rust. Will not sell individually. $850 Call or text Jeff with any...
I have a t5 that I want to install in my 1960 pickup and my 1954 Chevy bit I've always been thinking I was going to have to build a shifter to get...
Hello all, I have a 59 A-B that has a weird detonation problem. I'll start with the specs. It is a 4.25 stroke and 3.3125 bore with a 400 Jr. Cam....
I bought a rebuilt flathead with under 1k miles on it out of a 46 Mercury about a year ago. All the signs says it's a 59 a-b but it passes the...
Ok I know the basics that the early hubs are inside the drum and the later hubs are outside but can you mount the late hubs inside the drums? I...
Hello, I had my bendix spring break on my flathead today and my spare is sitting on the counter 750 miles away in Colorado. Any help would be...
It seems that the "made in USA" voltage regulators available today are junk. I have had three bad out of the box, as tested by the gen repair man....
49 Olds more door Solid Colorado Car with clear Colorado title 303 Rocket, Hydramatic 89,000 mi. All Original car, very complete. Never Painted,...
If so watch out for a guy named Alan Kirchner He had 3 flathead intake manifold on craigslist. I contacted him and made a deal over the phone...
Looking for some help because I am truly stumped. I was driving my banger A one day and it just shut off like you turned the key off. I checked...
I am looking to the hamb for help an a truly stumping problem in my charging system. So I converted to 12 volt in my 48 ford. All was well for a...
How do you turn the rear drums without removing the hub on my 48 ford. I see the taper for the axle is pressed in but can I remove that and then...
I have been searching and searching but I keep coming to a dead end. I found a factory looking coil for the 59ab that is a 12 volt coil a while...
So I am getting ready to start the rebuild of my 59AB for my car and I was looking for advice from people that have done it. I was going to go 276...
My uncle has owned this jimmy for a couple decades and its been sitting in a military crate since remanufactured in 71. He brought it out to me...
There is a little yogurt shop in town and the owner is a hamber. He doesn't want anyone to know but I thought it may bring business to him. If you...
I have searched and didnt find any exact answers to the info I need on surfacing the head and how much to sink the valves or if to even sink the...
I have a 1971 triumph Bonneville and I have been thinking about trying to trade it for another car. Would I get reprimanded for posting this as...
I posted a thread about hitting a deer the other night. It was my rant about how my original paint 48 ford with 59,000 miles was damaged and ot...
I have a 235 that I ordered a complete felpro gasket set for. It came with the rubber and rope rear seal. What are people using and what one works...
I get more grief about smothing my door jambs and wanting to upholster my inner fenders on my 54 chevy from my friends. They are both on the hamb...
I searched a bunch looking for ideas of what stock manifolds will work best on my 48' ford for dual exhaust. I have 8BA truck manifolds, EAB car...
I understand that the shifter location is farther forward on the s-10 tailhousing but how much? A friend of mine has a mustang t5 in his car and I...
I just purchased a nos quarter for a 4 door on the auction site today. I got an amazing deal in it and my intentions were to cut the bottom off...
On my 54 chevy half the filler from between the roof and drip rail was gone so I wire wheeled the rest out and cleaned the seam. Should I replace...
I am looking for a place in the front range that will provide everything (felts, glass, and seals) and do the install. I tried unique auto glass...
I recently purchased a 54 210. I have always wanted a post car and not a hard top and I finally found one that was in my price range. its a little...
I am getting ready to order a radiator for my 29 model a coupe with a flathead. I have been shopping quality, manufacturing materials, and price....
Alright, I had a buddy that is a surveyor stop by my rod shop tonight. We were shooting the shit and he told me of a stash of cars a few mile from...
Separate names with a comma.