The Jalopy Journal
bttt
I'm in the process of collecting part for a similar project, I already have a '5oMerc bored .080" over, dual 94's etc. Had to use the 8CM heads...
Thanks, Was considering an aftermarket frame with a 7 1/2" extension for spring behind. I see a lot of 9" Ford rears under Model A's but with...
Will a '40 Ford banjo rear fit under the fenders of a 28/29 Ford pu? Probably convert to open drive for use with B&G 5sp OD trans. Did a search...
Please look at post #4
Could I use the '40 spindles & brakes with a dropped "A" axle and spring?
Thanks for the measurement. I'm starting an AV8pu and want to know if a '40 front axle would keep tires under fenders.
I need the width dimension for front fenders on a 1928-29. Outside lip to opposite fender outside lip. I thought I saw it in a catalog some time...
Im considering an RTS 4 speed OD behind a Merc flathead. I found a chart someone posted that indicates that the 26% OD is only found on the mid...
I thought there would be more AV8 folks that would chime in with some suggestions for a frame. I'd like to hear pro's & con's of various setups.
Where are you located?
I have my '28pu sheet metal ready, Merc flathead built and T5 trans, so I'm looking for recomendations on an aftermarket frame set up for an AV8...
B.t.t.
I'm a driver and need to touch up the frame etc from time-to-time. Rustoleum with a brush - yes - a brush, and it looks great but this is not a...
I just checked my 34pu and the foot is on the frame - welting under the cab but attachment foot not up like your pic.
Wow, I had the good fortune to drive my Dad's Capri when I was in high school in the late 50's. (same color as yours but all one color) THe two...
You are correct. I kept looking for a responce and couldn't find it. Then, tonight, I realized I posted on the wrong area. Thanks.
Help! I'm visiting in the St Petersburg Fl area with friends and getting a little bored. I'm not used to sitting around without a wrench in my...
Still looking for a fendered, non chopped closed cab 1928-29 pickup project or finished rod. Prefer an AV8 but will consider others.
Well, it is a new year and my 28/29ccpu project seems to be going nowhere. My doors have been in another state waiting to have new panels for...
Not nearly as expensive of most pictured on this thread but should run nice at 276ci. Now all I need is a nice 28/29 cab to get this project moving!
Sorry about pic.
Here is a 29pu built by Ulus Burnette of Indy Rod Shop that has that similar look. Have a 28 pu started but slow going.
Here is my first attempt at a 34pu. The red/blk - 'Lil Red' is my daily driver.
Sorry - pic did take on previous post
Still gathering parts: AV8 full fendered traditional 1928 Closed cab pu Banjo rear/hyd brskes S10 5sp '50 Merc flathead-.080 over - dual...
There used to be a place on rt22 between Altoona and Pittsburgh that was called the "Topless Car Wash". I drove by it many times looking at their...
Test
I had 38 years as a shop teacher, Dept chairman etc. I was taught that a teacher had to have control of the classroom before education could take...
Separate names with a comma.
The Jalopy Journal
