The Jalopy Journal
overdrive?
Do you still have the 8" riteway?
Float level or powervalve
The problem with sending them out is if it is cut too small you are sol! Most hot rod glass shops want the car so they can make sure the cuts are...
Great Pictures, cool car, good looking dog. I hope Cheyenne was better than Deadwood. SOS different year.
Your GMC has a way cool dash and instrument panel in it. Everyone has the Chevrolet style. We are doing a 54 GMC in our shop now. Go to carzwy.com...
CARZ in Casper, WY call 266-0023 and ask for Mike or Vern and they can give you and idea.
fuel supply?
rebuild it or do't start it
http://www.carburetor.ca/carbs/kits/CK294.htm
Do you have power to the points with the key on?
Kendal GT-1 P ppm 1229/ ZN ppm 1415
Kendall GT-1 High Performance with Liquid Titanium, SAE 20W-50, also contains a boosted level of zinc dialkyldithiophosphate (ZDDP) additive to...
transmissionadapters.com pricey but good stuff
T5 behind a 235 works ok but keep your rear gears low enough to compensate for the lack of HP at highway speeds
Valvoline Vr1 is good for hot weather but Kendall GT is the besy all around oil for the money. These are both good oils for older flat tappet engines
Kendall GT has more zddp in it and it does not cost alot. Check the specs and you will be pleasantly surprised.
Twin I beam front suspension sucks go for the Chevy
try restoration specialties Max
Rotella T 15W 40 in all older flat tappet engines
Most people that go to Yellowstone are not looking for hot rods.
I have used a glass cutter the tapped it . put lighter fluid on the cut and lit it to burn the film away between the glass. practice on an old...
just a cast iron c6
The SEMA show was great but Las Vegas is nothing but a ripoff. Time for a move to a new city!
kNURLING USED TO BE THE STANDARD FOR TIGHTENING UP THE GUIDES. i THINK THAT SINCE THEY ARE OFF I WOULD GET NEW GUIDES INTALLED.
Separate names with a comma.