The Jalopy Journal
Picked up another old dirt bike at a farm in central Mo. last week. The guy had this in one of the barns. He said he was interested in selling but...
Saw this on a trailer across the road from my nieces house yesterday.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
327 small journal crank. When I first put this motor together I had installed a high volume oil pump. When I fired it up oil pressure was reading...
Seems like I saw a post on here about something you could spray on the bug guts to get them out of the fins on a radiator. I did a search a couple...
New phone so hope this works![ATTACH] [ATTACH] [ATTACH] This was early and I would guess pretty close to 80 or better left on the run.
I need to find some of the contacts that go inside of the taillight socket. I have found some online, but was trying to find someplace local to...
On the right side of the water pump below the lower mounting bolt hole, there is another small passage into the block that ties into the main...
Ran across this picture on a page that showed old pictures of the area I grew up in. How many can you identify?[ATTACH]
[ATTACH] [ATTACH] Need to get the headlamps raised up on my car. It has a Drake dropped bar on it and at max tilt it doesn't shine the light down...
Heads up for those traveling through Indiana for the Columbus event. I made a trip up there this week and I-70 is like driving through a...
Anyone in the Texarkana area know of a good hot rod friendly shop they would recommend? I have a friend that lives south of there that needs some...
Moved the car under it's own power all the way to the end of the driveway and back today. No problems so far!:) Hopefully interior next month and...
Need some help. After working on this for the last nine or so years, I finally fired it up last week and now I am in the process of fixing a few...
Getting ready to order up tires and wheels for my car. Going to run 265/75R16 on the rear with a 7 inch rim with 4 3/4 back space which will fill...
Back before GM started putting holes in the heads to mount brackets they were mounted off of the exhaust using bolts that had studs made on the...
http://www.foxauctioncompany.com/home.html Ran accross this today. Not connected in any way. Some pretty nice pieces. D
I have a 265 dist. that I would like to run in a 327. (like the nifty little oil fill tube on them) Will these work ok? Since the dist. body is...
Picked up a few items from an old Phillips 66 station that is calling it quits. Set of four on the hubcaps and they are nos. Could someone please...
Friend of mine is looking to find the phone number of the person that had a '33 cabriolet for sale this year in Salina. He said the car had...
Some time ago someone on here had a post about having these for sale. I tried searching and have had no luck. The person was hand forming them in...
Need some help locating some bulk headlamp conduit. The kits that I have found from the usual suppliers measure about .550 dia. I have a piece...
A friend of mine saw a 41 Stude for sale at the swap meet in Bowling Green and is interested in contacting the owner. Anyone here have any info on...
[IMG]
Found this outlet which may help some others with the same setup. The one the instructions suggest using won't clear the front carb. Napa 6051256....
I have a Allstate turn signal switch that I would like to find a new internal switch for. Didn't come up with anything on a net search, but may be...
Looking for info on this car. Builder, previous owners ect. A friend of mine just aquired it and looking for some history on it. Thanks, Dennis D...
I bought a set of Comp Cams stamped steel roller tip rockers for my SBC and the info sheet that came with them says you must use guide plates with...
Has the date been set for this event? Thanks, Dennis D
What size cable to go with. 1/8 or 3/16? What are most factory cables for cars? I'm guessing the car I am building is going to weigh about 2800...
Would someone post a link for me. I did a search on the forum and on Napa and Carquest site and can't get to where I need to be. Thanks in...
Separate names with a comma.