The Jalopy Journal
I am trying to find a power rack and pinion system for my 1960 pontiac starchief, just wondering if anybody might know where i could get one....
I have the bushings that connect to the frame I was able to get them from pst, I just need the other one
I am looking for a 4 wheel disc brake conversion kit for a 1960 pontiac starchief. So far I cant find anything, does anyone know of a place I...
I am restoring a 1960 pontiac starchief and I am trying to find a bushing that fits on a control arm looking piece that is mounted to the frame on...
I hooked the black wire to the ground on the starter should I change it to the positive on the starter.
That is where I hooked the black wire, where should the red wire hook up and does it only need two wires, there are four terminals on the amp meter.
It is a stock gauge. The shop manuel I was looking at showed the 12 ga. red hooked to the top screw on the regulator, and a 12 ga. black ran to...
I am trying to hook up a new gauge cluster for a 1955 chevy truck second series and I cant figure out how to hook up the wires to make it work any...
Does anybody know of a good source to get a new pinion yolk, the one I have is grooved on the shaft and I cant get the pinion seal to quit leaking...
Hey i was just wondering if any body new where to get the piece that goes into the pinion seal and hooks to the drive shaft, mine has a groove...
Hey I just ordered a new instrument panel from bow tie bits it was cheaper than restoring mine myself. thanks
apparently I dont know the difference between mechanical and electrical because mine doesn't have a tube it has wires hooked to the back. The...
the gauge is a mechanical gauge in a second series
I am trying to rebuild an instrument panel on a second series truck, I have a temp gauge that is broken and needs replaced, was looking for advice...
I just thought I would reply by saying thanks for the info, I talked to the napa owner in edmond oklahoma which is an old hamber and has a 48 he...
Hey i was looking at some front wheel bearings for my 1955 chevy truck 2nd series and i have been finding upgrades from the original ball bearing...
Thanks for the information I have narrowed it down to a factory re-pop for convience on my part as an electrical novice. American wire and...
Hey I was considering installing a new wiring harness system on my 1955 chevy truck just thought I would ask to see what kind you guys have...
Hey I thought I would reply back to say I really appreciate the excellent information from you all, it was really a step in the right direction...
Hey I appreciate the help. I noticed a couple of people talking about the hole on the bellhousing and the pointer being down by the starter. I...
I just got a 1955 chevy 3100 1/2 ton truck that has been sitting for quite a few years. I am trying to get the 235 engine fired up with little...
I've been lurking on the site for a while. Found some really good information. Enjoying the forum. I just aquired a 1955 chevy truck for...
Separate names with a comma.
The Jalopy Journal