The Jalopy Journal
Get rid of the amp. Meter and go with a one wire 12 volt alternator!!!!!
Use a hose that is long enough to put a LOOP or complete circle in it!
I suggest going to Chevy S-Ten 5 Speed trans and rear. I converted my "36" Chevy to open driveshaft But could not have done it without my Machine...
Use separate switches!
Back off nuts a few turns and drive it! Works every time!
I like to use a Gun Tap whenever I can. For aluminum, brass, copper material that tends to "Grab" I grind a more Positive Cutting Rake to the...
Bought my 1936 Chevy Coupe in 1958. Working on it steady now.
I remember "Tony The Ice Man"---He always had his "Pick"
*****always apply the heat to the outside of the bend***** *****this will prevent cracking*****
You cut Brass with a wood cutting table saw and blade? Your BALLS must be made of BRASS also! P.S. Nice Work.
I recommend a 5 speed Chevy S-10 trans & rear end.
Iz dat wot a "rat rod" iz???
Small Claims Court
Kind of looks like my 2.8 V-6 Chevy S-Ten pickup / late 80's I Like the Reply on "How To Shorten A Cable".
Heat the pipe BEFORE you put the expander in the pipe. Easy with a helper.
Did you ever drive a Divco Milk Delivery truck? You drove it sitting or standing up. Throttle was a twist of the shift lever and the clutch and...
I'm a 72 year old machine trade retiree and I never saw a machine quite like yours! Great find!
I Never Saw One With A Wood Floor
Sorry. My Old Achy Middle Finger Hit The 6 key Instead Of The 5 And My Tired Eyes And Rusty Brain Missed The Mistake. The Engine & Trans Have...
The only connecting rod problem my 216 had was caused by a piece of gasket cork that partially blocked one of the oil pickup scoops at the rod...
The Passenger Side Tail Light Assembly For My 1936 Chevy Coupe. I Just Found This Item On Ebay. Cant Wait To Get It. STEN
I put 52 Chevy Car drums on a 51 pickup truck straight axle to have 5 lug bolt pattern.
I plan to replace my straight axle with an M II unit but can't find any specs. as to the gap width of the suspension unit that my frame will be...
Does anyone need a 1964 Chevy Truck Engine? Perfect condition. Low miles. Great oil pressure and volume. With or without Packard transmission...
1955/18TH. Edition Of "Motor's Auto Repair Manual" Has A Detailed Cut-Away View Of The Rear Axle 1940 -1954 Showing The Section That I Plan To Modify.
That's The Easy Way! I'll Do It At The Differential Pinion Shaft!
Yes I Do And Will!
No!
Has anyone converted a Chevy closed drive shaft to "OPEN" drive shaft At the "Rear End Differential" ?
Separate names with a comma.
The Jalopy Journal