The Jalopy Journal
I just picked up a pair of what I think are 1951 cadillac tail lights. I was hoping someone might know if the red top lense from a 49 Cadillac...
Looking to see how wide the front fender trim piece is on a 53 chevy. Greatly appreciated
Needing to find proper molding for a 52 chevy front fender...but they dont seem to exist anywhere that I can find. I can find the molding for the...
Looking to push the "buy it now button" on a MII front end for my 1952 Chevy Deluxe Coupe. In the description of the clip from CE it says it will...
OK, finally had a minute to get into the motor. Took off the valve cover and turned the oil pump with a drill...Im getting oil to the top of the...
I just read an article on another site that said this was a fix to get more oil to the rockers...apparently something that was done quite a bit in...
Going to try and get my Chevy 235 fired up this week and was having a look over the motor before I do so. I noticed something strange. Stock oil...
I will get the measuring stick out here when I get a minute...the rest of the frame is straight, the front end is a hack job.
Just picked up a 52 Chevy Deluxe coupe. Whoever decided to change the front end before did a real bang up job on the thing. Passenger front wheel...
Perfect! Thanks for the info.
Like...''oit, i got another STD''
Just looked inside my new to me 38 flathead. Cylindet walls look brand new as do the pistons . My question is what is written on top of all the...
I wouldnt say rebuilt, but freahened up. New rings etc. The water pasdages in the heads are fairly gunked up. Removed water pumps and there...
just got to taking the heads off the flathead I got a while back to inspect things and I am really happy with what I see. Cyliner walls look brand...
Can you get away with mixing these? I have a 10" pressure plate and a 9.5" clutch disc.
Collecting parts for av8 build. I currently have a few options... Motor is a 38,transmission is a 38 also. For rear ends I have a couple options...
Anyone know if I can use the shorter axles and housing off the 35 onto the 48 center?
Will the backing plates and everything from a 48 banjo rear bolt up to a 35 banjo by chance?
That's the advice I'm looking for. If thank you. If I built the car with this transmission and later on down the road decide to swap out gears is...
Rear end is a 48 banjo with 3.54 gear ratio
Picked up a 4 speed to put behind a 38 flathead the other day... I know it's not the desirable 3 speed, but what can I expect with it? A really...
I was hoping you would say 49 car because I have one laying around!
Just out of curiosity... Is there an open drive shaft conversion for the transmission end of things?
So looks like I have to track down a v8 tube/shaft... Are there any differences between the 38-48?
Gathering parts for the 1930 sport coupe. I have a 48 banjo rear, 1938 flathead motor, and a 1938 transmission. The question is torque tube/drive...
The reason I'm asking is that I have one off a 49 flathead and was hoping it will work
Is that clutch disc 9''?
Well shit. That's the one.
Just picked up a 1938 flathead and am trying to niece together the clutch. Does anyone have a diagram of that clutch set up? Thanks in advance......
Round 3 or 4. I've lost count. As of tomorrow I am picking up a complete, rebuilt stock, 47 flathead. Wish me luck! This is after numerous other...
Separate names with a comma.
The Jalopy Journal
