The Jalopy Journal
Yeah, that was part of the joke.
Everyone knows that a wats link works better than a panard bar.
6-inches
When they killed all but three of their magazines back in 2019, the braintrust figured all those advertising dollars would simply "fold" into the...
First? Ak Miller set records in one and Fred Larsen wrecked it before this was even on the radar. Internet journalism...
If you use a Cole Hersee 24200, there is no power needed at the switch, the switch simply makes the ground to switch the solenoid on/off. A small...
The MotorTrend app and channel is RIP.
EZ-Clip
In the Summer Bros' Golden Rod documentary, there is footage of them driving the streamliner around the test facility with such a setup....
How much boost? You could increase the CC of the heads to lower the compression and slow the blower down to decrease the boost, both will help...
Have done a bunch of Wilwood installs as described. Used 7/8-inch master cylinder for a 4-wheel disc setup and it worked great. Good pedal...
I'd rate it as "off topic".
My comment was referring to Street Rodder, a now defunct publication that Motor Trend cares less than two sh*ts about. They're not going to put...
I don't think anything outside of the digital age will ever get scanned and put online by MotorTrend. There's just no man power to do it nor any...
Rick's Tanks in Texas can build you something to suit if you provide a detailed drawing. Just had them do one for a C10 we're building. Fit perfectly.
Yup!
Glad it worked out!
Cheap tube shocks, no. But there are adjustable tube shocks on the market and adjusting them "tighter" doesn't put them in a bind like a friction...
The good thing about friction shocks is that if you're going to rely on two pieces of leather to dampen the suspension, location doesn't really...
I like the brackets on the crossmember, very clean!
Glad to help! You're all correct, time is money. Between the phone call between Brian and I, drawing it up and a couple text messages, I might...
You're welcome!
Is the adapter flat or are you trying to space the fan out further? I might be able to help. Shoot me a PM with some dimensions. There are a...
Typically speaking, the closer they are to the end of the axle, the more effective, as it's the shocks job to try to dampen the movement of all...
[ATTACH]
Make sure the throttle shafts are tight and not pulling air (vacuum leak). Also check all the air/fuel screws and make sure the tapers aren't...
I'll relay what I did to get my 301 street worthy, that and a good search through the old threads should yield the info you need. First off, I...
I would bet those brackets are flexing, the belt is walking, and away it goes. It doesn't take much...
Hell, I could get all 6 to work, whether they're 48s, 97s, or 81s, but it would be cost prohibitive for most! :D I think the best advice would be...
I had a 4x2 setup on a Chrysler that would idle at 600 rpm and ran really well, but it took ALOT of work. My advice would be honest with yourself...
Separate names with a comma.