The Jalopy Journal
Thanks for the replies guys! "shapely hips" ha ha ha!!! I could have sworn I saw a coupe that had the brackets run under the rear pan or fender...
Was wondering if anyone has mounted a 41 rear bumper and brackets on a 39 coupe. Is it feasible to mount and use the newer brackets or if anyone...
Thanks for the input guys. I ordered and received the welting and it appears to be a good product. Now I need to find some willys guys who know...
Hi, does anyone have any preference on what fender welting to use. I thought I heard a while back that julianos had one of the best ones. Going to...
fiftyv8 do you have a combination valve on your car?
Hi Gang..Have a question about brakes. I have a willys coupe that I am doing a brake system from scratch. Utilizing a speedway rotor and metric...
SOHC 427. I can't accurately see what that says where I am talking about in your pic.It isn't clear...is it an emblem like Luke has shown?
Hi, would anyone have exterior pictures of a 39 willys coupe, especially the doors and decklid .( on the decklid , between the license lamp and...
They wrote back pretty quickly. I guess the 61C wheel is called an Original direct drill and they can adjust the backspace. Just wished it used...
It looks like you are measuring that as I thought was supposed to be done also, but everything I read shows measuring from the top of the wheel...
yes the thick spacers would be worrisome..ummm... maybe not back in my teens and twenties as much lol. Chevy57 dude...I will.
They are going on the back of a willys coupe. I want to run radir 10.00-15 cheater slicks and the center section of the tire is my concern. it is...
Somehow I got it in my mind that actual older cragar ss wheels in a 15X10 size was a 3-1/2 backspace. I have 2 sets of these one being 3-7/8 and...
I need to get front shocks for a 39 willys coupe that has the original frame and axle in it. Straight stud at bottom and bushing at top. Anyone...
Just curious to see what others may do on a steel willys coupe with original frame and ferguson rear floors. I saw some where on here that a guy...
Thanks, I bookmarked that if I need it.
I have a set of original Cragar direct drilled 4-3/4 bolt pattern I want to use on my car. The front rotors have the 7/16" stud size and that...
Hi, I have a Ford 9" housing equipped with 11X 2-1/4 backing plates and moser axles. To look old school and traditional I would like to use some...
I know, I know..probably won't even listen to it!
Researching the battery shutoff switch hookup as what others do, I decided to install the switch in the negative cable. Recently purchasing a...
Nick O, I just talked to a fella last weekend at a small show in Medina and he has a 55 chevy pickup which he had done at Goodguys this year. He...
1948 pontiac 4Dr Fastback for sale. I am listing this for a friend of mine, please contact with the following phone number and NO scammers.. I...
I think I may have goofed up somewhere on my big idea here but am not sure where. The clutch pedal with the tab where the rod hooks to will move...
I was actually thinking of doing just that
Voodoo, you are the first one I have heard to say that. You mean maybe post #48? 45 has a juice clutch? I made all my pedal setup so not sure of...
it is hard to tell from the pics, but do any of you guys run a mechanical bellcrank with both levers pointing straight down? Can this be done and...
Squirrel, Sorry , you're right, I will here. It appears most of the stock bellcranks have offset levers and it makes sense what you say, but how...
I thought I would reopen this old thread I had on the clutch area components. I did get the speedway arm and have since made my pedal arms and am...
1940 Ford, all steel, lots of chrome under hood, SBC, 350 trans., Ford 9" rear, chopped 2-1/2", Mustang frt end, 10 disc CD, AM/FM, 2005 Street...
I found this older thread and thought I might ask something on the master cylinder issues. I am setting up a willys coupe with manual brakes. All...
Separate names with a comma.