The Jalopy Journal
Now that is neat having the napa guy let you in the back. I would spend all day if I could. I've found a rebuilt F1 master cylinder at napa. Keep...
Quick mock up after flipping the rear spring, and installing 1932 spindles. [ATTACH] Posted using the Full Custom H.A.M.B. App!
Also two large C clamps are needed to remove and install the pack. With all leafs removed you can remove the main leaf. Cut an old model A brake...
[ATTACH] The dust line is two missing leafs from the bottom. Two leafs from the top are now under the main leaf witch I left un-cutt. The top of...
[ATTACH] This is it^^^^^ Thanks for the reminder. Posted using the Full Custom H.A.M.B. App!
I got my '40s rear drums to fit on a brake lathe at work. I was not cutting but just sanding down the rust. If I have small runout, I'm not going...
[ATTACH] Get out and drive them! .80 over with model b head and carb. Posted using the Full Custom H.A.M.B. App!
Now with NGK five is norm, four is hotter and six colder. Four for that old dirty flatty losing comp. And six for that high compression motor. I...
Champion plugs are now made in Mexico. NGK has plugs for flatheads, and you can choose the heat range you want. Posted using the Full Custom...
At least it was an A not a '32. Still sucks. Dispatched call or not, knowing about the fire and not doing anything about it is stupid. Do what's...
Buy new frame, switch everything over and replace what's needed. It's a project two ways till Sunday. Posted using the Full Custom H.A.M.B. App!
I've had a bolt back out, in my model a banger. Had to pull the transmission to get bolt back. Try turning engine by hand to rule out bad...
Wow glad I got my before he closed shop. Posted using the Full Custom H.A.M.B. App!
Closed cabs are hard to find, I would give it a shot. But look it over well your in for a lot of work. Back when I was looking for my start I had...
Good turn out last year.. LG boys made it down and plenty of other cool vintage rods. I wont be able to make it this year, changed province. Next...
Bill! You found the HAMB. Right on, welcome to the board. Gavin
Warping look out for it. When I bought a model A one rear drum had a stud welded in. I ended up buying a second rear axle to get a useable drum...
Man I gotta spend more time in the garage... Real nice work! Thanks for sharing.
Fill the swimming pool and drive that rust bucket right on in! Posted using the Full Custom H.A.M.B. App!
Nice buggy, 21''s look right at home. Maybe a model B head would work with that rad?;)
Got this one together, 1928 A .80 over with model B head and carb. [ATTACH] Posted using the Full Custom H.A.M.B. App!
What he said^^
neat, model T body, flathead and heavy z's.
was there a bolt on the end of it...??
Model B gasket wont work, heart shaped around the valves.
I choose the 30's, I like the over all smallness of the cars, compared to bigger 50's, 60's vehicles. I enjoy the simplicity when working on this...
So basically I would be living the life of your parents, being young in a post war world. I was under the idea of an industrial boom from about...
My Grandad and I are 40 years apart. If I could be 20 years old in the year he was born 1949, that would be the life I would live. Posted using...
All tires are good for five years, this also goes with your OT driver. On the other hand I have ran tires that where 20 Years old for about...
Also normally a part should be marked 12 volts, if not could be six. But not always. Posted using the Full Custom H.A.M.B. App!
Separate names with a comma.