The Jalopy Journal
The Bushmaster is having his last open house Saturday. [IMG]
Still pictures from the event: https://www.flickr.com/photos/121766713@N04/albums/72177720309691393 Jim
I use Rem-Oil on my bare metal parts and sometimes apply it with a paper towel or then sometimes put some of the oil on a little cut down section...
Yes it is still happening in a tad less than 2 weeks. Remember that this is a Friday and Saturday Only event. NO Sunday racing. Run who you...
15 more days until some more good times in Southern Missouri. Sadly Jeff the Wolfman has recently passed but we will be racing as a tribute to him.
The one had from there: [IMG] Jim
Due to popular demand and sponsor support we are pleased to announce that we are presenting a 3rd Bootheel Fuel & Gas Drags in 2023! Registration...
Pictures from the race: https://www.flickr.com/photos/121766713@N04/albums/72177720300978447
We are now less than one month away from opening the gates for the 2022 Bootheel Fuel & Gas Drags at Jeffers Motorsports Park in Sikeston MO. If...
This really is great news! They will have LIVE music Friday evening, July 29 at the 2022 Bootheel Fuel and Gas Drags! We were able to book a...
Not to get you side tracked but you should have a main feed off of the battery or alternator to inside the car which can then branch out to your...
Some pictures from last year: https://www.flickr.com/photos/121766713@N04/albums/72157719774146826 Jim
Had a wonderful time there last year as well as MANY others. This year should be even better !!!!!.
I've found the below site to have a lot of info. Mostly towards the car audio side but it covers area's like relays, fuses, circuit breakers,...
[MEDIA] Jim
Couple more days and the weather is looking good. [MEDIA]
I've taken out some GM latches and inside of them I've found a trip catch finger that if you pull this back about 1/4" to 3/8" then the latch will...
I looked at the link and I LIKE the ANL holder they show with the rubber boots. It looks like that would work just fine. The ones I get have a...
If the battery is going inside of a steel enclosure, run the wires through grommets or bulkhead connectors. With any electrical circuit you...
See if this place has anything: www.autotechs.com Luckily with the remote you have it might be possible to find one using the pictures on...
Most engines have machined surfaces that things like the exhaust manifolds, water pump, oil pan, timing cover, and so on sit onto and what I did...
Like roadrunner said, voltage drop (VD) can be a bad thing but you will have this in any vehicle. There are so many connections and lengths of...
Electrical circuits in cars should have some type of protection so that if something goes wrong the cars do not catch fire. They make fuses that...
Given that most cars (and frames) are made up of a bunch of stamped steel parts spot welded, partially welded together (and sometimes glued...
The original cables should have been sized properly to limit voltage drop. When you relocate your battery to somewhere else and the cables need to...
Here is a link to some pictures I took: http://good-times.webshots.com/album/571020119ddAcBZ Jim
Separate names with a comma.
The Jalopy Journal