The Jalopy Journal
This is a new Borgeson Universal Saginaw 525 Manual Steering Box 920010 with new pitman arm .Pitman #806021 manual steering arm .This a a quick...
I am having a very hard time finding a 3/8 24 to 1/8 male npt fitting for the master cyl i bought to attach my brake line .Does anyone know...
these are the two I have to choose from but the manual brake is one they had on it originally .What is the difference between the two ? [IMG]...
Is there any issue with using a manual master cyl on a brake booster .I found what was originally used on my truck and its what they are calling a...
I am getting a new power steering box for 56 chevy front clip and wondered what is best to get .They offer a Variable Ratio ,12.7:1 Ratio and...
Thanks for the reply
Front disc but will be upgrading front and rear disc when I do the rear end.The brakes are not stock
Also forgot is better to go with 1" bore or bigger size for better braking .They are power brakes .
I am attempting to upgrade my brake system and I and getting a new master cylinder and booster .My question is there appears to be some type of a...
Not really too much of a issue just figured it would help disperse some of the pressure of the bolt head.
There is no bushing just a bolt thru the frame .I looked on the schematic and that's how its supposed to be .
20% into to the surface .The hole is still perfect round.
maybe at most 20% and it is the hole but its still round.The material is not so much worn away just distorted in more
I am aware of the upper ones you are talking about those are fine .These are the lower ones .I have the proper bolts .There is just minor wear on...
I am rebuilding my front clip in my 56 chevy and I wondered if its ok to put a washer on each side of the lower control arm bolt .There is some...
Thanks guys
Ah ok makes more sense now .Just was getting a lot of mixed answers for such a simple thing .Can I eliminate the hose to the carb and just put a...
I have a 1973 chevy 350 and I just got some new valve covers and my question is about the breathers .My other valve covers had a pcv valve coming...
....
I want to have my rear of my 56 chevy truck upgraded but dont have the ability to do myself so wondering what is a fair price to have my rear C...
I am upgrading my 56 chevy truck front suspension and decided to go coil overs .I dont have access to a scale so trying to figure out what spring...
Looks pretty much exact
On my center link where the pitman arm comes in contact with it there is no thick bushing like that its just thin .I wonder if it was missing or...
Its a 1980 camaro front clip and its a little rubber seal that goes literally right between the pitman arm shaft on the suspension side and the...
I am trying to replace that little rubber washer that is between the pitman arm and the suspension but I dont know what its called and when I try...
I did try turning it with engine off too and it seemed to turn ok .
I did use power steering fluid but just generic brand .Its just grinds as its gets close to max turn.Its close to sound of squealing belt but for...
So bottom line is its going to be the pump if anything not the box?
I did that also and yeas when jacked up its still get loud when gets to the max turn .
I did drain it fully and add new fluid.Is there a better more intricate way to do it ?
Separate names with a comma.