The Jalopy Journal
Yes I do. Currently running the silver 8inhg spring since I pull 17 inhg at idle. Sent from my SM-G981U1 using The H.A.M.B. mobile app
Gave full vacuum a try and it didn't fix it. Feels the same as ported. That being said it is the tiniest little dip, maybe I'm being too critical....
Ttt Sent from my SM-G981U1 using The H.A.M.B. mobile app
I haven't, easy enough to give a quick try. Will I need to readjust my idle screws move, or just the idle speed when on manifold? Sent from...
I didn't think of stretching, but have thought about using the spring from a click pen. I read on here that the pink was actually the strongest...
Vacuum advance is connected to ported Vacuum abs is about 15 more degrees. Sent from my SM-G981U1 using The H.A.M.B. mobile app
Top hole using 43 squirter. It did improve it , just no more adjustment left. Sent from my SM-G981U1 using The H.A.M.B. mobile app
Has anyone seen stronger than 8 inHg step up springs? I'm pulling about 18 inches at idle and when I stomp it to wot, I get the slightest lean...
TTT
TTT Sent from my Pixel 3 using The H.A.M.B. mobile app
Ttt Sent from my Pixel 3 using The H.A.M.B. mobile app
[ATTACH] Set of 4 14x8 Ansen Sprint Wheels. They have the standard 5x4.75" Chevy bolt pattern and are wrapped in 225/60R14 in the front, and...
Hard to see but there are four leaf clover in the fob. Belonged to my dad when he drove the Vette I now have.[ATTACH] Sent from my Pixel 3 using...
Try. 600 and they are yours Sent from my Pixel 3 using The H.A.M.B. mobile app
Alright Alright Alright, I know you've all been waiting to hear what my issue was and whose advice solved the issue. Step one: Adjusted base...
Thank you all for the help. As 31Vicky said, this is the plan. I'm getting miles on it first since it runs well when not doing the quick step to...
That's the one. Other than using a 650 rather than 600, I've got everything they specify. Sent from my Pixel 3 using The H.A.M.B. mobile app
Repower. Sent from my Pixel 3 using The H.A.M.B. mobile app
Yeah! Basically lean out my primary and fatten up the secondary. And help the transition to it quicker. I can bump up the jet in the secondary and...
Alright, I'll get a pressure gauge on the pump to verify that portion and get some miles on it so I can calibrate wot. By the way you said it, I'm...
I have yet to attempt anything with secondary. I've got some rods that could lean it the primary a bit before having to change a jet. Sent from...
It was shipped as a long block. Sent from my Pixel 3 using The H.A.M.B. mobile app
What I meant there is I didn't do the wot tuning procedure from the manual that required multiple wot pulls through the rpm range. So I went to...
I do not have an adjustable rotor. Sent from my Pixel 3 using The H.A.M.B. mobile app
I do not have a pressure gauge on it, so I'm relying on the manufacture s 5.5 that they claim. Sent from my Pixel 3 using The H.A.M.B. mobile app
Yes they ran it on the Dyno. It is also a hydraulic roller lifter so I shouldn't have to worry to much about mating the lifters. I only say that...
Damn, a lot to digest there, but an awesome resource. Thank you. I guess it's off to getting new plugs and trying one circuit at a time. Sent...
Talked to msd, basically he said I'm not going to be able to read it there and if it was running, it's getting voltage. Not very helpful, but he...
Separate names with a comma.