The Jalopy Journal
Some new pics, updated carb. bttt
bttt
bump. 16" steel wheels will clear front brakes if your not into late model mustang wheels
found the "O" for the "FORD" logo, polished off the overspray behind hood, removed grill, re-sprayed and replaced grille. 16k or best cash offer.
new heater core, new radiator, new front tires. rear has disc brakes. bttt
[ATTACH] [ATTACH] 1965 F100.Very solid body, new cab mount cushions. 2005 crown vic police aluminum front crossmember, suspension and brakes. 460...
I should have said the snout on the isky cam is missing the step that reaches just through the cam retainer and determines the endplay for the...
Anyone out their buy a y block isky cam that didn't have the nose that reaches through the cam retainer like the stock '57 cam does. Is there a...
Machine work completed on 292 y block. Does anyone know a good reference book for assembly? Any sugesstions appreciated. 54chop
Paul's about the same age as my brother in law who was in Vietnam. He tires easily, had adrenal gland removed, throat cancer(never smoked) and...
Looks like wolves in the crates to me 54chop
It's the rim that's bent. Unfortunately the wheel is painted and has new tires mounted. Put them on the car and spun this wheel by hand just to...
Is it possible to straighten welded spoke wire wheels?(from a model A) If so please explain how. 54chop
Anybody here know AZRATROD? Have any dealings with him? Beginning to worry a little about our in progress transaction. Thanks for looking at this...
Certified high pressure pipe welder here. My 2" pipe welds routinely pass x-ray. Properly prepped, there will be no contamination in the weld....
Anybody know a sure fire way to remove a head stud that's broke off just below flush in a ford banger block? 54chop
Rode a 1999 1300 Suzuki to the top in 2006. Kind of fun to look at the weather(clouds etc.) a few thousand feet below mixing it up. More and more...
If you'll use swinging pedals mounted to the body(and not the frame) use a hydraulic set-up. If the body or frame flex at all, linkage will move,...
I've seen some school bus frames and perhaps motorhome frame that would work(if cut off around the firewall area) in the same manner as...
Why not add a X-member out of 1.5x3 with a bolt in structure in the bottom of the middle of the X and welded in tunnel above that(in the middle...
How loose is it? Sounds like a metalurgical disaster shocking it like that. If you have a forge, why not heat it up and smack on the bosses that...
1970 351W heads flow pretty well on a 289 and they would drop compression probably by a point or so over the 289 heads that those piston's...
Long ago, I installed a new solid lifters and cam in a 460. Couldn't get any oil to the top end(thru the pushrods). Turned out the solid lifters...
If you try to make a screamer mainly with cam(lots of overlap) and compression it likely will have a narrow power band. To get a wide power band...
That 300 TIG you have should be plenty big to do a frame. At my job, they have us do a tig root pass and then mig over the top of that for lift...
I think the wheels work because they are black. The shorter box works well with out the chop. Well thought out and proportioned ride. 54chop
I haven't seen your other post about your engine tuning difficulties. But, with that large cam and if you are running a single plane...
If you are set on mounting the spring to the axle, I believe you'd need to put a shackle between the frame and the spring eye(to get rid of...
Separate names with a comma.