The Jalopy Journal
guys with a t-bucket,how did you run your emergency brake cables ? What E brake handle are you using ?
Space is limited so where did you put your brake peddle and gas peddle? Have pictures?
It's cold and no heat in the garage so I was wondering where do I stand $$$$$ wise. Summit $ 2,214.47 Speedway $ 2,071.07 All others $ 7,878.28...
I have a sbc, with a Edelbrock dual quad manifold , Offenhause ram induction adapters and a TH 350 trans. Because of the ram adapters I cant fit a...
I am getting close to taking my home built roadster pick up for the Washington state inspection. Any advice , any horror stories ?
I will be getting a TH 350 and torque converter from a friend. He does not know what the stall speed is. Can I tell by looking at the convertor...
I am installing a th350 today and need to know how much atf to put in the converter and pan. I have read 1-3 qt in the converter and 7 qt in the...
I am installing a fuel pressure gauge. Do I mount it after the pressure regulator and since I'm running dual quads ,do I need 2 gauges?
I am in need of a electric fuel pump.The prices on e-bay are all over the place,from $15 to over $130. I remember there use to be "pushers and...
What are you guys using for a steering box,other than Vega / corvair in your T-bucket.
It's my first time changing wheel studs .The rear end is a 12 bolt chevy and the stock studs came out easy about 5-6 hits with a hammer. I looked...
up dated photo bucket. http://s210.photobucket.com/user/lakesmod/library/
I have a 3- speed manual transmission and need help with numbers. GM 3952645 LT 82 27 I think the GM numbers say it's 1970-1975 What's the...
I need to tap a hole in dom tubing for a 5/8-18 rod end. The drill for this size is 37/64. I have a 9/16 drill,that is a 1/16 smaller then the...
I want to run dual quads in my project and I am looking at e-bay. There are 2 Holley 390 CFM carbs listed. Are these to small for a 350 chevy?...
Is there a way to find a car I had knowing only the license # and state? The web sites I have found want $$ for a search. Is there a free site...
Any one using the offenhauser dual quad cross ram adapters? Pictures?
I would like to see pictures of how you mounted your radiator in a roadster, lakester ,lakes modified etc.
I have this image in my head of a semi-elliptic spring used as a 1/4 elliptic on the front end of a old car,maybe 1930's. One end is mounted to...
I have a 1948-1956 straight axle and need to remove the king pin. After removing the locking bolt will the king pin need to be pressed out or can...
I am looking for a 3-speed shifter and came across some in a Speedway Race catalog #358 page 160. The shifter has 2 shift levers. How do you...
I bought a straight axle that the guy said was a F100/F1 but didn't know the year. Looking at different sites there is a listing from 1948-1956...
Trying to strip paint from a new wheel. I have tried JASCO with no luck. Brushed on more,let it set for 1 hour and hit it with a pressure...
Has anyone ordered tires on line ? Tire Rack seams to be the cheep-est at $119 for a 31 x 10.5 x 15 ($238 for two) with shipping at $62.56 for...
I have seen some projects using solid motor mounts. What is the advantage/disadvantage to there use?
I am using a Wintec Fabrication body with 2" x 6" frame. http://s210.photobucket.com/user/lakesmod/library/third%20one?sort=3&page=1 Fred
I was looking for engine numbers on the engine "pad" in front of the right head ,none there. I went to the back of the block and found 3...
I am looking at Craigslist for wheels and need to know if a chevy 5x5 bolt circle is the same as a ford 5x5 bolt circle. Thanks Fred
What is the last year chevy had a i beam front axle in the 1/2 ton pickups?
Anyone know if Hotrod a-rama at the swiss in Tacoma is on for this year?
Separate names with a comma.