The Jalopy Journal
For me , it's a tie between a '69 Z28 Camaro and a '66 396/4 speed Caprice-the Caprisce was a 2 door, Marina blue, with Strato bucket seats,...
For me, at least, I find the biggest challenge of Chip repair (I have a black Car too that is clear coated) is the sanding/finishing after...
As for your problem, from the pictures you posted, it appeared to me that you problem starts above the beltline, so, if that's true, the issue...
Mac's has them, and I know Drake used to-I put new ones one my Car about 5 Years ago, and they were cast Brass (or something similar)- I must have...
The only problem I've had with sound deadeners may have been self inflicted (but not intended)-I sprayed my Car with Lizardskin (both heat &...
I am so angry with myself right now-I was installing the Windshield in my Car today (first time-new Windshield/Chromed Frame/Seal) and when I...
My Car is quickly approaching the finish line, however every time I have to fabricate, design or decide if I like a part or modification, I sit...
I believe they rust out because of the design- there was only setting tape used (without any weep holes, sealant or means for water to escape the...
To my knowledge, Coupes and Sedans are the same (35 or '36)-I believe the Cabriolet and the Roadsters may share also- As for rusting out, I...
I know I might sound like a smart aleck here (not meaning to), but have you taken off your Hood to see if that allows it to cool and is really...
Southern Polyurethanes offer both a Solvent based Wax and Grease Remover as well as a Waterborne Wax and Grease Remover-I just finished painting...
I am sorry, I don't recall the exact number as he did a bunch of stuff for me- what I do remember is that it was a bunch cheaper than I expected-...
Really can't comment on Andy, but if you are looking for someone to polish some heads, I can recommend J & S Polishing in Colorado Springs-he did...
I had the same thing happen with an Epoxy that I have used for years (looked identical, like sand in it), and the Manufacturer replaced both the...
Zoops polish was discontinued, and the Employees restarted the Company and now calls it Shine Seal-
This is the best stuff I've found- http://www.shineseal.com/ Sharkhyde works too, but I have a problem getting it on uniformly-now,when someone...
My Big Block
Apparently you are having issues-what are they? From what I've seen, a Canister will store vacuum, but will work for only a stroke or two before...
I needed a new Fire extinguisher for my Car, and did as much research on the subject as I could-I didn't want a regular, dry type of extinguisher...
The other choice would be to run a CV Joint Driveshaft-a more expensive option for sure, but it will stop vibration (you may have to only do one end)-
I believe Chris has moved to Tremonton-
I recently built the Exhaust for my '35, and knowing that I was going to weld it I did not want Aluminized Pipe, so I bought my Pipe here:...
Here's a little info: https://help.cricut.com/help/cricut-explore-materials-settings
Sure don't see why you can't (but you couldn't with the older machines)_
My Wife has 4 of those machines, and she has made me all kinds of stuff (Hot Rod T-shirts (Crower,etc.)-she has a Heat Press), she's made me...
If you want the good stuff, this is where I get it: https://ceautoelectricsupply.com/battery-cable/
I have a Big Block in my '35, and I'll tell you that it is an extremely tight fit (and I have a 6" Firewall setback)-even then, a cooling fan is...
Here's mine-I made it out of 16 Gauge, and wanted it to be removable- I did it the hard way-I took a piece of 9" heavy wall pipe, and used a...
X100-I love the stuff, and have been using it for over 10 Years-the good part is that abuot 2-3 Years ago they made it UV resistant-I love their...
Crazy as it sounds, old timers also used straight Water (H2o)-
Separate names with a comma.