The Jalopy Journal
maybe :)
original steel body restored sometime in the 1980's, tci frame, ifs, 4 link rear with a ford 8", 5.0 ford with msd atomic efi, t5 5 speed trans
got my A finished and took out for a run, only took 13 years. kept stopping to build other cars. small video clip my son took. [MEDIA] yes its on...
i made the parts for the control rods to control the indicators & high/dip/flash switches. didn't want a bolt on indicator unit fastened to the...
are the front and rear the same, my front one is 30mm top to center and rear is 21mm top to center. thanks
would anybody have the measurement for the top mounting hole for the front and rear running board brackets off an original frame. the ones on my...
not the one I remember. but very informative. thanks
going to change the front of my 150" FED from fixed to a sprung front end due to the track I run at is not very smooth. I remember seeing a scan...
this is what I did http://www.jalopyjournal.com/forum/threads/home-made-electric-fan-shroud.696347/#post-7764588
One lever operates the turn signal via a double pole switch, while the other is for the high/low headlights
This is what I did in my Tudor http://www.jalopyjournal.com/forum/showthread.php?t=681439
Thanks, 1 down 1 to go. I must have an English block I'm sure my filters on the right
Need help with some measurement off a Cadillac 472/500 engine. I'm using one in a FED and the chassis builder needs to know some dimensions....
DRAGSTER_JOHN, the front wheels are they bought or home built? 17"?
Fenderless, that's ideal. Do you know what the rear tyre diameter is?
i won't be doing the framework. i will be getting a chassis builder to do it so it will be hopefully sorted. but i have to work out what wheelbase...
dreracecar, thanks for the measurements they will come in handy. anyone out there want to show off there FED and help me decide
Hi all, Thinking of building a FED but not sure on the wheelbase either 150" or 170". Looking for pictures from the side of Feds that come...
Thanks, this will be very useful
dragsled, thanks for the build index info it was very helpful
thanks Don did a search for FEDs. so much info but trying to narrow it down to wheelbase for starters. like your idea of 1/4 eliptical front...
from the UK and I'm thinking about building a cheap FED for a bit of fun. but there are such a range of types and wheelbases i don't know where to...
unknown make i got off evilbay [img] i live in the wettest place in the UK so need a heater to demist the screen, in summer if we ever get one
the saddle tanks came with billet bungs and a rubber grommets to allow the the fuel nozzle to pass through the splash apron. they look too high...
With this setup what the location of the filler and exhaust?
It's actually not as bright as it is in the last photo. The camera just makes it look that way
I will probably only put the cover on at cruises and shows. Thanks, I might try the mirrored sunglasses idea later
have been trying to work where to put the warning lamps on the dash without them looking like spots on a face. so while on holiday nothing to do...
What the shifter boot from?
any updates???
Separate names with a comma.
The Jalopy Journal
