The Jalopy Journal
That Jaguar belongs to Marsh Burns. He owns Twin lake Jags, builds some very nice street rods. Not sure what the engine in the Jag is.
You can have a rear glass cut, using tempered glass, it will bend enough to work just fine. The rear glass and quarter glass in my " 54 wagon...
My "54 Plymouth Suburban.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Here's my 1954 Plymouth wagon, bought in 2008, finished in 2011. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
You might try, American Chrome Plating, 524 Gold St, Centralia,Wa, 360-736-0052. This info is 2-3 years old, may not be current or viable. Not in...
Here's a few pictures of my "54 Plymouth Suburban. I think it qualifies as a custom wagon. I've posted pictures in the past, But I feel it fits...
This is my 1960 coupe with a 1953 nose, 2 " chop in the front, 500" Cad, turbo 400. Bob[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Here's mine, first 2 pictures are from 2008, next 2 are 2011 to now. Bob[ATTACH] [ATTACH] [ATTACH] [ATTACH]
In 1963, I installed a B&M dual range hydro in my 1950 Olds, with a 1957 Olds J2 engine. The 1957 and later engines are externally balanced. You...
A few pictures of my 1960 Studebaker, disguised to look like a 1953. 500 inch Cad, Turbo 400, top chopped 2 inches in the front. I can't take...
This picture was taken about 35 years ago, [ATTACH] car looks about the same now. Bob
[ATTACH]
Here's two of mine. bob[ATTACH] [ATTACH] [ATTACH] [ATTACH]
A couple pictures of my "37 Ford. It was painted in 1986-87, and I still have it.[ATTACH] [ATTACH]
And another one.
That is not Von Hunter, it's Phil Shaffer, who worked with Von .
Be aware that the Olds 394 engine is externally balanced. You will need an early flywheel with a weight attached in the appropriate spot. B&M used...
Attached is a picture of a Moon disc on one of my cars. I used a long tubeless stem, and drilled a hole in the disc, eliminating the need to...
Here's a picture of my Henry J, which I sold about 15 years ago. The front uprights were turned upside down, they are perfectly symmetrical,...
Here's my "54 Plymouth Suburban wagon. I bought it in 2008, finished it in 2011. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
It's been 50+ years since I was at Kilcup's shop, so things are a little hazy, however I do remember that it was on the south side of Vaughn St,...
Take a look at www.northwestclassicautomall.com, click on "cruise news", near the top.
How about double-sided tape ?
Pontiac used the Buick engine.
Attached is a picture from a 1961 Hot Rod magazine article, which shows that 215 Buick and Olds intake and exhaust manifolds are...
215 Buick pistons are all dished, some more than others, Olds pistons are flat top. Olds pistons with Buick heads = 12 to 1 compression. Bob
How about drilling and tapping to the next larger size ?
I would suggest taking your car to the Beaches Cruise In, at Portland International Raceway, every Wed. through the end of Sept, costs $5.00 for...
Randy, The fenders are steel. I didn't build the car, so I don't know if any holes were welded up. or not. Bob
Separate names with a comma.
The Jalopy Journal
